Справочник Пользователя для Carrier 1300L

Скачать
Страница из 16
15
TABLE 4 — METHODS FOR CLEANING STAINLESS STEEL
*Use of brand names is intended only to indicate a type of cleaner and
does not constitute an endorsement; nor does the omission of any
brand name cleaner imply its inadequacy. Many products named are
regional in distribution and can be found in local supermarkets, depart-
ment and hardware stores.
†All products should be used in strict accordance with instructions on
package.
NOTES:
1. Use the mildest cleaning procedure that will do the job efficiently and
effectively.
2. Always rub in the direction of polish lines for maximum effectiveness
and to avoid marring the surface.
3. Use only a soft cloth, sponge, fiberous brushes, plastic or stainless
steel pads for cleaning and scouring.
4. Rinse thoroughly with fresh water after every cleaning operation.
5. Always wipe dry to avoid water marks.
6. Never use common steel wool pads; these will cause rust!
TASK
CLEANING AGENT*
METHOD OF
APPLICATION†
EFFECT ON FINISH
Routine Cleaning
Soap, ammonia or detergent and 
water
Sponge with cloth, then rinse with 
clear water and wipe dry.
Satisfactory for use on all finishes.
Stubborn Spots and Stains, 
Caked-on Splatter, and other 
Light Discolorations
Revere Ware, Goddard’s, Twinkle, 
or Cameo stainless steel cleaner or 
Soft Scrub cleaner
Apply with damp sponge or cloth. 
Rub with damp cloth.
Satisfactory for use on all finishes if 
rubbing is light. Use in direction of 
polish lines.
Household cleansers, such as Old 
Dutch, Bon Ami, Ajax, Comet
Rub with a damp cloth. May contain 
chlorine bleaches. Rinse thoroughly 
after use.
Use in direction of polish lines.
May scratch or dull highly polished 
finishes.
Heat Tint or Heavy Discoloration
Revere Ware or Goddard’s stain-
less steel cleaner
Apply with damp sponge or cloth.
Use in direction of polish lines.
May scratch or dull highly polished 
finishes.
Caked-on Foods and Grease, 
Fatty Acids Milkstone (where 
swabbing or rubbing is not 
practical)
Easy-Off oven cleaner
Apply generous coating. Allow to 
stand for 10 to 15 minutes. Rinse. 
Repeated application may be
necessary.
Excellent removal. Satisfactory for 
use on all finishes.
Hard Water Spots and Scale
Vinegar
Swab or wipe with cloth. Rinse with 
water and dry.
Satisfactory for use on all finishes.