Справочник Пользователя для Frymaster CF Series

Скачать
Страница из 50
CF SERIES GAS FRYERS 
CHAPTER 1:  INTRODUCTION 
 
 
1-1 
1.1  Applicability and Validity 
 
The CF Series Gas Fryer model family has been approved by the European Union for sale and 
installation in the following EU countries:  AT, BE, DE, DK, ES, FI, FR, GB, IE, IT, LU, NL, 
NO, PT and SE. 
 
This manual is applicable to and valid for all CF Series Gas Fryer units sold in English-
speaking countries, including those in the European Union.  Where conflicts exist between 
instructions and information in this manual and local or national codes of the country in which 
the equipment is installed, installation and operation shall comply with those codes. 
 
This appliance is only for professional use and shall be used by qualified personnel only, as 
defined in Section 1.7. 
 
 
1.2  Parts Ordering and Service Information 
 
In order to assist you as quickly as possible, the Frymaster Factory Authorized Service Center 
(FASC) or Service Department representative requires certain information about your equipment.  
Most of this information is printed on a data plate affixed to the inside of the fryer door. 
 
Parts orders must be placed directly with your local FASC or distributor.  Included with fryers when 
shipped from the factory is a list of Frymaster FASCs.  If you do not have access to this list, contact 
the Frymaster Technical Service Department at 1-800-551-8633 or 1-318-865-1711. 
 
When ordering parts, the following information is required: 
 
Model Number: 
 
Serial Number: 
 
Type of Gas or Voltage: 
 
Item Part Number: 
 
Quantity Needed: 
 
 
Service information may be obtained by contacting your local FASC.  Information may also be 
obtained by calling the Frymaster  Technical Service Department at 1-800-551-8633 or 1-318-865-
1711. 
 
When requesting service, please have the following information ready: 
 
Model Number: 
 
Serial Number: 
 
Type of Gas: 
 
 
In addition to the model number, serial number, and type of gas, please be prepared to describe the 
nature of the problem and have ready any other information that you think may be helpful in solving 
your problem.