Справочник Пользователя для Mitsubishi Electronics JT-SB216JSH-W-E

− 11 −

Step

What to check for 

Check

1

Check the power supply voltage 

Is single-phase 220-240V power being used? 
Incorrect power supply may cause malfunctions. 

2

Turn the ground-fault circuit 

interrupter on

3

Turn the power switch "ON".

Is the power lamp in the display on? 

4

Insert your hands to check if air is 

being blown.

Is the air blowing? 

5

Insert your hands to check if warm 

air is being blown.

(Only with the JT-SB216JSH type 

when the heater is "ON".)

(The JT-SB216KSN model does not 

have a heater)

Is warm air blowing? 

( If the room temperature is above 30ºC, for safety reasons 

the heater will not operate even if the heater switch is 

turned on.）

※  As the heater is a simple heater, if the room temperature 

is less than 18ºC, the air may feel cold. 

Is the heater lamp in the display on? 

6

Is the appliance mounted securely without any vibration or 

abnormal noises?

※ Do not turn the power on while hands or other objects are inside the hand drying area. 

※ If the display lamp flashes, turn the power switch "OFF", check that all of the lamps on the display section are off, and 

then wait for 1 minute before switching the power back "ON".