Справочник Пользователя для Lucent Technologies Release 8.2
Configuration 3: R8si<—x.25 —> R8r Gateway
<—ethernet—> R8si
<—ethernet—> R8si
117
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
3
C-LAN Administration
Switch 3 Task — Assign Node Names
This task assigns node names and IP addresses to each node in the network. This
screen is administered on Switch 3. A Node Names screen must be administered on
each switch in the network.
screen is administered on Switch 3. A Node Names screen must be administered on
each switch in the network.
The node names and IP addresses in any network should be assigned in a logical and
consistent manner from the point of view of the whole network. These names and
addresses should be assigned in the planning stages of the network and should be
available from the customer system administrator or from a Lucent representative.
consistent manner from the point of view of the whole network. These names and
addresses should be assigned in the planning stages of the network and should be
available from the customer system administrator or from a Lucent representative.
Note:
Enter node names for Intuity AUDIX and MSA adjuncts on page 1. Enter
node names for switches, routers, and CMS starting on page 2.
node names for switches, routers, and CMS starting on page 2.
Begin
Steps
> Open Node Names form — enter
ch node-n
> Go to page 2.
> Enter values.
> Submit the screen
End
change node-names
Page 2 of 6
NODE NAMES
Page 2 of 6
NODE NAMES
Name IP Address Name
IP Address
default__________
0__.0__.0__.0__ _______________
___.___.___.___
node-1 _
_ 192.168.10_.1__
_______________ ___.___.___.___
node-3____ 192.168.10_.3__
_______________ ___.___.___.___
________________ ___.___.___.___
_______________ ___.___.___.___
Field
Conditions/Comments
Name
Enter unique node names for the following 2 nodes:
•
C-LAN Ethernet port on Switch 3
•
C-LAN Ethernet port on Switch 1.
IP Address
The unique IP addresses of the nodes named in the previous
field.
field.