Справочник Пользователя для Lucent Technologies Release 8.2
Configuration 3: R8si<—x.25 —> R8r Gateway
<—ethernet—> R8si
<—ethernet—> R8si
121
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
3
C-LAN Administration
Switch 3 Task — Assign Processor Channels
This task associates data links (hardware) with processor channels (software) on
Switch 3.
Switch 3.
Begin
Steps
> Open Processor Channel Assignment form — enter
ch com p
Note:
The Processor Channel number, the Interface Channel number, and the
Local and Remote Session numbers do not need to be the same number
but they should be made the same whenever possible to simplify network
“bookkeeping” and diagnostics.
Local and Remote Session numbers do not need to be the same number
but they should be made the same whenever possible to simplify network
“bookkeeping” and diagnostics.
> Enter values
change communications-interface processor-channels
Page 1 of X
Page 1 of X
PROCESSOR CHANNEL ASSIGNMENT
Proc Gtwy
Interface
Destination Session Mach
Chan Enable Appl. To Mode Link/Chan
Node Port Local/Remote ID
1:
n
_______
_ __ _____ ____________ 0____ ___ ___ __
2:
n
_______
_ __ _____ ____________ 0____ ___ ___ __
:
31: y dcs____
c
3_
0
_
node-1______ 5003 31_ 31_ 1_
:
32: y dcs____ c
3_ 0
node-1______ 6002
32_ 32_ 2_
:
256:
n
_______
_ __ _____ ____________ 0____ ___ ___ __
Field
Conditions/Comments
For Processor Channel 31
: (ethernet connection to Switch 1)
Enable
Set to
y
.
Appl.
Indicates that this connection will carry DCS data.
Mode
Node-3 is the “client” for this session. Set node-1 to
“server” (
“server” (
s
).
Interface Link
This must match the link number assigned on the node-3
data module screen.
data module screen.
Interface Chan
A value of
0
allows any available interface channel to be
used for this connection. This number must match the
Destination Port number on the Switch-1 Processor
Channel screen.
Destination Port number on the Switch-1 Processor
Channel screen.
Destination Node
Name of the far-end node for this channel. This must be a
name entered on the Node Names screen.
name entered on the Node Names screen.
1 of 2