Справочник Пользователя для Lucent Technologies Release 8.2
Configuration 5A: R8csi <—ppp—> R8r (one C-LAN)
<—ethernet—> R8si
<—ethernet—> R8si
151
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
3
C-LAN Administration
Switch 1 Task — Assign IP Interfaces
The IP interface for each C-LAN board on the switch must be defined on the IP
Interfaces form. Each DEFINITY switch in an IP network has one IP Interfaces form.
Interfaces form. Each DEFINITY switch in an IP network has one IP Interfaces form.
Begin
Steps
> Open IP Interfaces form — enter
ch ip-i
> Enter values
change ip-interfaces
Page 1 of 2
IP Interfaces
Inter-region IP connectivity allowed? n
Enable
Net
Eth Pt Type Slot Code Sfx Node Name
Subnet Mask
Gateway Addr
Rgn
y C-LAN 01c08 TN799 B node-1-eth
255.255.255.0
.
.
_.
1
n
255.255.255.0
n
255.255.255.0
n
255.255.255.0
Field
Conditions/Comments
Inter-region IP
connectivity
allowed?
connectivity
allowed?
Enter
y
to allow IP endpoints (phones and trunks) to use
MedPro resources administered in regions that are
different from the endpoints’ regions.
different from the endpoints’ regions.
Enable Eth Pt
The Ethernet port must be enabled (
y
) before it can be
used. The port must be disabled (
n
) before changes can be
made to its attributes on this screen.
Type
Enter c-lan or medpro.
Slot
Enter the slot location for the circuit pack.
Code
Display only. This field is automatically populated with
TN799 for C-LAN or TN802 for MedPro.
TN799 for C-LAN or TN802 for MedPro.
Sfx
Display only. This field is automatically populated with B
for the TN802 and TN799.
for the TN802 and TN799.
Node name
Enter the unique node name for the IP interface. The node
name here must already be administered on the Node
Names screen
name here must already be administered on the Node
Names screen
1 of 2