Справочник Пользователя для Lucent Technologies Release 8.2

Administration for Network Connectivity

CID: 77730

555-233-504 — Issue 1 — April 2000

54

This is a checklist of things that need to be completed before you can proceed with the 
network administration tasks. Review this checklist before starting the administration 
tasks. 

✔

The prerequisite administration needed depends on whether the system is new or 
is being upgraded from an R7 or pre-R7 system to R8. Use the following map to 
determine which steps to perform.

For more information about the checklist items, refer to Appendix A or the 
appropriate upgrades book in "References", 

 Steps 1–6 apply only to systems being upgraded to R8 

from an R7 or pre-R7 release. For new systems, skip to step 7.

Save translations on customer flash card (csi or si models) or tape (r 
model). For R7 systems, skip to step 5.

This step is for the si model only. It preserves ISDN-PRI connections, 
which (for R7 and later) are carried on the NetPkt circuit pack instead of 
the PI or PACCON circuit packs. ISDN-PRI connections are preserved 
transparently on the csi and r models.

the si switch has existing ISDN-PRI connections that the customer wants to 
keep, complete the following steps:

De-administer the ISDN-PRI connections:

busy the ISDN links

remove comm-interface links of type ISDN

remove comm-interface processor channels that use ISDN links

remove data modules using those links

Save translations on a “working” flash card

skip to step 3.

1 2 3  4 5 6 7 

New

R7

Pre-R7 si with

Other Pre-R7

ISDN connections
to be preserved