Справочник Пользователя для Barco SJ/T 11363-2006

Setup Menu

In the Input Menu, the Adjust On field indicates whether any changes you make using the 
Input Menu

 will be applied to the Preview or Program source. 

For example, if you select Preview, as shown in the illustration below, and change the 
Background, Color Balance, or other parameters using the Input Menu, you can view 
those changes on the Preview source — while the Program source remains unchanged.

Adjust On Field

If both paths are using the same input source, only the selected path is modified.

When LOGO is selected, only the Adjust On and Auto Acquire input menu functions are 
available for adjustment.

In the Input Menu, the Type field shows the currently selected input type, and enables you 
to change the type if required.  The available types depend on the selected input:

For inputs 1 - 4:  CVBS, Y/C, YPBPR, RGB/HD-YUV

For inputs 5 - 8 (when Digital):  DVI

For inputs 5 - 8 (when Analog):  CVBS, Y/C, YPBPR, RGB/HD-YUV

For the SDI input:  [SDI]

From the Input Menu, select Colorspace to change the color space for the selected input 
on Program.  Values depend on the selected input.   Please note:

The default selection for YP

 or YUV is SMPTE.

The Colorspace Menu allows selection between these two values when the input 
is analog (excluding CVBS, Y/C) or DVI. 

When either the CVBS or Y/C input is selected, only [SMPTE] is shown.

INPUT

1024x768 @59.94

> Adjust On

Preview

T

he SDI input always shows its type in brackets (e.g., [SDI]), 

given that this input type cannot be changed.