Справочник Пользователя для Barco SJ/T 11363-2006

Setup Menu

Direct measurement of the signal

If the input signal’s timing is too different from the saved configuration, a good lock may not 
be possible.  In this situation, the “Invalid Signal” message is displayed,  and the video 
output will be black.  You will also see “Invalid Signal” if the configuration file for an input 
has been deleted.

When Auto Acquire is 

, dial in your timing parameters manually.

Please note the following important points:

It is recommended that you leave the Auto Acquire mode 

.  Then, if the timing 

changes on any input (whether or not you have a saved config file), you will 
always get an output image.  On the other hand, if the mode is 

 and the input 

timing changes, the output will be black.

When the Auto Acquire mode is 

, the PDS automatically detects and acquires 

the input video type and resolution (in most cases), and limits menu selections to 
those applicable to the detected video type. 

If you are an advanced user and you know the exact timing parameters for your 
input(s), you can turn the Auto Acquire mode 

, and dial in your timing 

parameters manually.  

From the Input Menu, select Aspect Ratio to display the Aspect Ratio Menu, which 
allows you to set a pre-defined or custom ratio for the input. 

Aspect Ratio Menu (sample)

The following functions are available:

 — This function allow you to adjust the image to one of the 

following values:  1:1, 3:2, 4:3, 5:4, 16:9, Custom.

 — If Custom is selected, the Ratio line appears:

:  0.750 to 3.000.  The default value depends on the 

last Aspect Ratio selected before Custom was chosen.  

Note that the PDS displays the input video aspect ratio according to the 
input format detected.  For example:



Computer video at 1280x1024@60Hz defaults to 5:4 aspect ratio.



NTSC video defaults to 4:3, HDTV 1080i video defaults to 16:9.

If you have already saved configuration files for your inputs, it 
is recommended that you turn the Auto Acquire mode 

.  

This provides the fastest transition times.  When the mode is 

, transition times will be greater, due to the time required 

to analyze the input timing for each source.

ASPECT RATIO

> Aspect Ratio

Custom

Ratio

1.777