Справочник Пользователя для Barco SJ/T 11363-2006

Using the Logo

A logo is a full-screen video source which, when transitioned to Program, appears on top 
of all other sources. The PDS can store up to three logos in non-volatile memory.

The PDS enables you to transition to or from a full-screen logo, in the same way that you 
transition to or from video inputs.  When you press TAKE, the system transitions the 
selected logo to or from Program at the current transition rate, and the sources flip-flop in 
the  manner described in the “

Please note the following important points:

A logo will be labeled INVALID if it was captured at a resolution that does not 
match the current output resolution  The resolution at which it was captured will 
also be displayed — e.g., [INVALID 1600x1200]. 

If you scroll to an invalid logo, the LOGO button cannot be activated. The 
following message will appear.

LOGO Output Resolution Message (sample)

If LOGO is selected when there are no saved or valid logos, the following 
message will appear:

LOGO Error Message (sample)

When you first start up a PDS that has stored logos, a message like the one in the 
following illustration appears during initialization:

LOGO Initialization Message (sample)

Ensure that you are familiar with the Logo Menu.   Refer to the “

” section on 

page 59 for details.

This stored LOGO does

not match the current

output resolution.

Please capture again.

No saved or valid

logos available

for display

LOGO1 loading...



                             

5%