Справочник Пользователя для Barco SJ/T 11363-2006
82
PDS • User’s Guide
4. Operation
Using the Logo
2.
Press SEL and scroll to select a saved logo.
Logos appear in this list only if their resolution matches the output resolution.
3.
Press TAKE.
The logo appears on Program and the LOGO Setup Menu displays the logo
number in brackets, as shown in the following illustration:
number in brackets, as shown in the following illustration:
Figure 4-67.
Logo Menu — Logo on Program
aÉäÉíáåÖ=~=içÖç
Use the following procedure to delete a saved logo:
1.
In the Logo Menu, scroll to Selection and press SEL.
2.
Select the logo to delete. Press SEL.
The DELETE LOGO line displays the logo number you selected.
3.
Scroll to DELETE LOGO and press SEL. A message like the one in the following
illustration appears:
illustration appears:
Figure 4-68.
Delete Logo Message (sample)
4.
Press SEL to delete the logo, or ESC to continue without deleting.
LOGO
> Selection
[LOGO3]
[1024x768]
Note
When the system transitions to the logo, the PDS flip-flops
sources in the Inputs Section. Refer to the “
sources in the Inputs Section. Refer to the “
”
section on page 78 for additional information.
Permanently Delete
LOGO2?
<SEL>=YES
<ESC>=NO