Справочник Пользователя для Q-Logic 59060-02 B
3 – Event Messages
Alarm Events
59060-02 B
3-15
A
(A1004.002F) (Request for Domain ID rejected, WorldWide Name (WWN) device_WWN not
allowed to join fabric.)
Meaning:
Meaning:
The switch with the specified worldwide name is not allowed to join
the fabric.
the fabric.
Action:
Add the switch to a group in the active security set.
(A1004.0030) (Topology change, lost route to switch with domain ID domain_ID)
Meaning:
Connection was lost to a switch in the fabric.
Action:
Inspect switch connections and device hardware for proper
operation. Review accompanying alarms for other causes.
operation. Review accompanying alarms for other causes.
(A1004.0032) (E_Port not supported on remote port. Reconfigure remote switch to
connect.)
Meaning:
Meaning:
An E_Port isolated because the port on the remote switch could
not configure itself as an E_Port.
not configure itself as an E_Port.
Action:
Change the port type on the remote switch to G_Port or GL_Port.
(A1004.0033) (Remote switch is in Interop mode or using Legacy Address Format)
Meaning:
A remote switch is attempting to connect with conflicting settings
for Interop mode or legacy address format.
for Interop mode or legacy address format.
Action:
Configure the switches so that Interop mode and Legacy Address
Format settings are the same throughout the fabric.
Format settings are the same throughout the fabric.
(A1004.0034) (Failed to connect to a switch due to incompatibility - contact technical
support.)
Meaning:
Meaning:
The two switches are incompatible. Possible causes include
incompatible interoperability mode configurations, incompatible
firmware versions, and incompatible licensing.
incompatible interoperability mode configurations, incompatible
firmware versions, and incompatible licensing.
Action:
Check interoperability mode settings, firmware versions, and
licensing on the remote switch. Otherwise, contact your authorized
maintenance provider.
licensing on the remote switch. Otherwise, contact your authorized
maintenance provider.
(A1004.0035) (Failed to connect to a switch due to incompatibility - check interop
settings.)
Meaning:
Meaning:
The remote switch failed to connect possibly because the
interoperability mode setting is different than that of the local
switch.
interoperability mode setting is different than that of the local
switch.
Action:
Reconcile the interoperability mode settings on the local and
remote switch so that they are the same. Otherwise, contact your
authorized maintenance provider.
remote switch so that they are the same. Otherwise, contact your
authorized maintenance provider.