Инструкции для Q-Logic 59060-02 B

Содержание

• Table of Contents

  3
• Section 1 Introduction

  5
  • 1.1 Intended Audience

    5
  • 1.2 Related Materials

    5
  • 1.3 Technical Support

    6
    • 1.3.1 Availability

      6
    • 1.3.2 Training

      6
    • 1.3.3 Contact Information

      7
• Section 2 Events and Event Logging

  9
  • 2.1 Understanding Severity Levels

    9
  • 2.2 Displaying Events using the Event Browser

    9
  • 2.3 Displaying the Events Using the Command Line Interface

    10
  • 2.4 Configuring the Event Log

    11
  • 2.5 Archiving and Downloading the Event Log

    11
  • 2.6 Configuring Port Alarm Thresholds

    12
• Section 3 Event Messages

  13
  • 3.1 Alarm Events

    13
    • (A1000.000F) (The switch is canceling the hotreset - try again later)

      13
    • (A1000.001D) (Hotreset failed and the switch must be reset normally)

      13
    • (A1000.001E) (Hotreset failed and the switch is being reset)

      13
    • (A1003.000B) (Failing release of fabric lock held by switch with domain domain_ID)

      14
    • (A1003.000C) (Fabric Busy, failing lock request from domain domain_ID)

      14
    • (A1003.000D) (Fabric already locked by domain domain_ID)

      14
    • (A1003.000E) (Couldn't acquire lock from domain domain_ID)

      14
    • (A1003.0010) (Segmenting, zoneset zone_set_name not defined)

      14
    • (A1003.0011) (Segmenting, zoneset zone_set_name already active)

      14
    • (A1003.0012) (Segmenting, zoneset zone_set_name merge conflict)

      14
    • (A1003.0013) (Segmenting, zone zone_name merge conflict)

      15
    • (A1003.0014) (Segmenting, alias alias_name merge conflict)

      15
    • (A1003.0015) (Zoneset Activation received from switch with domain domain_ID failed, unknown zoneset zone_set_name)

      15
    • (A1003.0016) (Releasing Lock held too long by domain_ID)

      15
    • (A1003.0017) (Activation of zoneset by management server failed due to port port_number out of range.)

      15
    • (A1003.001B) (Failing remote zoning configuration, total zoneset limit would be exceeded)

      15
    • (A1003.001C) (Failing remote zoning configuration, total member limit would be exceeded)

      15
    • (A1003.001D) (Failing remote zoning configuration, total zones in zonesets limit would be exceeded)

      16
    • (A1003.001F) (Failing remote zoning configuration, member limit for zone zone_name exceeded, (size= number_of_zones, limit= maximum_number_of_zones))

      16
    • (A1003.0020) (Failing remote zoning configuration, total zone limit would be exceeded)

      16
    • (A1003.0021) (Failing remote zoning configuration, Zoneset is empty)

      16
    • (A1003.0022) (Unable to update database with newly activated information, a 'save' operation is in progress)

      16
    • (A1003.0023) (Fabric Busy Zoneset operation failed)

      16
    • (A1003.0024) (Request already in progress (internal lock held))

      16
    • (A1003.0025) (Error reading security set.)

      17
    • (A1003.0028) (SFC failure received from remote switch with domain domain_ID)

      17
    • (A1003.0029) (No response received from switch with domain ID domain_ID)

      17
    • (A1003.002A) (No response received from switch with domain ID domain_ID)

      17
    • (A1003.002B) (No response received from switch with domain ID domain_ID)

      17
    • (A1003.002C) (Zone Merge response indicates failure due to zoning limits, Isolating link)

      17
    • (A1003.002D) (Zone Merge response indicates failure to merge, Isolating link)

      18
    • (A1003.002F) (SW2 Zoning Not Supported by other switch, Isolating link)

      18
    • (A1003.002E) (Zoning merge has been rejected.)

      18
    • (A1003.0030) (Zone Merge rejected by remote switch.)

      18
    • (A1003.0031) (Error reading zoneset from activate direct.)

      18
    • (A1003.0032) (Zoneset zone_set_name failed validity checks (empty or contains empty zone/alias))

      18
    • (A1003.0033) (No memory for command completion)

      18
    • (A1003.0034) (Merge failed, total zoneset limit would be exceeded.)

      19
    • (A1003.0035) (Merge failed, invalid zone data received, ISOLATING)

      19
    • (A1003.0036) (Merge failed, member limit for zone zone_name exceeded, (size= member_number, limit= member_limit))

      19
    • (A1003.0037) (Merge failed, Total zone member limit would be exceeded)

      19
    • (A1003.0038) (Merge failed, Total zones in zonesets limit would be exceeded.)

      19
    • (A1003.0039) (Merge failed, total zone limit would be exceeded.)

      19
    • (A1003.003A) (Zone Merge conflict for ZoneSet zone_set_name (Zone mismatch for zone= zone_name, check type or members), ISOLATING)

      19
    • (A1003.003B) (Incomplete merge request sequence received, unable to process request.)

      20
    • (A1003.003C) (Incompatible Zoning mode, Isolating link)

      20
    • (A1003.003E) (Security: Ports downed for INVALID_ATTACH require administrative action to be brought online.)

      20
    • (A1003.003F) (ISL group empty and links up. Set ports offline to activate.)

      20
    • (A1003.0040) (Zone Member type member_type unsupported.)

      20
    • (A1003.0041) (Zoning objects which contain Fibre Channel (FC) Address Members not being sent to remote switch on save, not supported in this mode)

      20
    • (A1003.0048) (Active Zone Set zone_name no longer in database, please deactivate zone set if not already in progress (the save will be deferred until zone set no longer active!)

      21
    • (A1003.004C) (Active ZoneSet containing Fibre Channel Address may cause fabric to segment due to switches that do not support this zone member type)

      21
    • (A1003.004D) (Port group does not contain entry for this switch)

      21
    • (A1003.004E) (Group entry for local switch does not support authentication)

      21
    • (A1003.004F) (No Zone Merge Response)

      21
    • (A1003.0050) (ISL group does not contain entry for this switch)

      21
    • (A1003.0051) (Domain ID for local switch does not match fabric binding)

      22
    • (A1003.0052) (ISL group does not contain entry for switch domain_ID)

      22
    • (A1003.0053) (Fabric binding must be unique, domains are assigned to multiple security group members

      22
    • (A1003.0054) (Failure at remote switch)

      22
    • (A1003.0055) (Problem on zoning save of following switches: domain_ID_list)

      22
    • (A1003.0058) (Active ZoneSet zone_set no longer in database, please deactivate zoneset if not already in progress or fabric will be inconsistent)

      22
    • (A1003.0059) (Failing remote zoning configuration, zone member type not supported)

      22
    • (A1003.0060) (Zone Merge conflict (Alias mismatch for alias= alias, check members)

      23
    • (A1003.0062) (Failing delete orphans zoning request, fabric locked by switch with domain ID domain_ID. Retry command later.)

      23
    • (A1003.0063) (Failing delete orphans zoning request, fabric busy. Retry command later.)

      23
    • (A1003.0064) (UFC failure received from domain domain_ID)

      23
    • (A1004.0001) (Port in active hard zone, but not installed or present on this switch.)

      23
    • (A1004.0005) (No communication from neighbor switch on port port_number with domain ID domain_ID, lost route)

      23
    • (A1004.0008) (Eport Isolating due to ELP Incompatibility)

      23
    • (A1004.0009) (Eport Isolating due to ESC Incompatibility)

      23
    • (A1004.000A) (Eport Isolating due to EFP Domain Overlap)

      24
    • (A1004.000B) (Eport Isolating due to Switch Administratively Offline)

      24
    • (A1004.000C) (Eport Isolating due to Domain ID Locked, Domain ID unavailable)

      24
    • (A1004.000D) (Eport Isolating due to RDI SW Reject)

      24
    • (A1004.000E) (Eport Isolating due to RDI Domain out of Range)

      24
    • (A1004.000F) (Eport Isolating due to Merge Zone Failure)

      24
    • (A1004.0010) (Eport Isolating due to Remote switch using same domain ID)

      24
    • (A1004.0011) (Eport Isolating due to Remote switch isolated)

      25
    • (A1004.0012) (Eport Isolating due to ISL Security)

      25
    • (A1004.0013) (Eport Isolating due to all switches incapable of becoming Principal Switch)

      25
    • (A1004.0014) (Eport Isolating due to TOV mismatch indicated on ELP)

      25
    • (A1004.0015) (Eport Isolating due to Invalid Attach)

      25
    • (A1004.0020) (R_A_TOV mismatch indicated. Reconfigure to connect to remote switch.)

      25
    • (A1004.0021) (E_D_TOV mismatch indicated. Reconfigure to connect to remote switch.)

      25
    • (A1004.0023) (Attempting to connect to switch with incompatible time out value configured (R_A_TOV/E_D_TOV).)

      26
    • (A1004.0024) (Attempting to connect to switch that is in non-interop mode)

      26
    • (A1004.0026) (Configured Domain ID domain_ID not available and Domain ID is locked on this switch)

      26
    • (A1004.0029) (No Switch capable of being Principal Switch. Reconfigure Principal Switch Priority.)

      26
    • (A1004.002B) (Port port_number not configured for E-Port capability, reconfigure to G/GL to connect to remote switch)

      26
    • (A1004.002D) (Non-interop Legacy switch setting prevents domain/port zoning)

      26
    • (A1004.002F) (Request for Domain ID rejected, WorldWide Name (WWN) device_WWN not allowed to join fabric.)

      27
    • (A1004.0030) (Topology change, lost route to switch with domain ID domain_ID)

      27
    • (A1004.0032) (E_Port not supported on remote port. Reconfigure remote switch to connect.)

      27
    • (A1004.0033) (Remote switch is in Interop mode or using Legacy Address Format)

      27
    • (A1004.0034) (Failed to connect to a switch due to incompatibility - contact technical support.)

      27
    • (A1004.0035) (Failed to connect to a switch due to incompatibility - check interop settings.)

      27
    • (A1004.0036) (Domain ID domain_ID assigned to different switches. Cannot join fabrics.)

      28
    • (A1004.0037) (Fabric Binding Error - please reconfigure: Local switch assigned domain domain_ID which is locked, fabric binding indicates domain domain_ID should be used.)

      28
    • (A1004.0038) (WorldWide Name (WWN) device_WWN assigned domain domain_ID, fabric binding indicates this domain is reserved for device_WWN.)

      28
    • (A1004.0039) (WorldWide Name (WWN) device_WWN currently in fabric, no fabric binding in active security set for this WWN.)

      28
    • (A1004.003F) (Request for Domain ID rejected, WorldWide Name (WWN) device_WWN not allowed to join fabric.)

      28
    • (A1004.0040) (World Wide Name (WWN) device_WWN assigned domain domain_ID, fabric binding indicates it should use domain_ID.)

      28
    • (A1004.0041) (Eport isolating due to E_Port License Exceeded.)

      28
    • (A1004.0043) (Forcing Domain ID change due to Interoperability setting from old_domain_ID to new_domain_ID.)

      29
    • (A1004.0048) (Eport Isolating due to Port Binding failure)

      29
    • (A1004.0049) (Eport Isolating due to Remote inactive)

      29
    • (A1004.0050) (Maximum hard zoning member limit exceeded, Reverting to soft zoning. Requires port reset.)

      29
    • (A1004.0051) (Blade IO blade_number isolated due to startup problem)

      29
    • (A1004.0052) (Eport Isolating due to Switch Binding failure)

      29
    • (A1004.0053) (Adding Denial of Service entry for source FC Address 0xaddress)

      29
    • (A1005.0006) (Request from WWN device_WWN address FC_address, failed authentication, verify MS security configuration)

      30
    • (A1005.000A) (Cannot enforce zoning for member domain_ID, port_number, this zone member will be ignored)

      30
    • (A1005.000C) (Configuration error, insufficient credit in pool. Extended credit not granted for port port_number)

      30
    • (A1005.000D) (Configuration error, insufficient credit in pool. Extended credit not granted for port port_number)

      30
    • (A1005.000E) (Configuration error, can't extend credit on loop capable ports. Extended credit not granted for port: port_number)

      30
    • (A1005.0013) (Hotswap procedure failed - must hardreset switch)

      30
    • (A1005.0020) (Warning - development logging is enabled)

      30
    • (A1005.0022) (Blade in slot slot_number must be reset after leaving Diagnostics AdminState)

      31
    • (A1005.0024) (Switch must be reset after leaving the Diagnostics Admin State)

      31
    • (A1005.0034) (System resource error - contact technical support)

      31
    • (A1005.0035) (System resource error - contact technical support)

      31
    • (A1005.0036) (Hotswap procedure failed before last reset - must hardreset switch)

      31
    • (A1005.0037) (Hotswap procedure never completed - the blade will not be functional until the switch is hardreset)

      31
    • (A1005.0038) (Switch incompatibility error - contact technical support)

      31
    • (A1005.0039) (Fabric Login (FLOGI) from address FC_address failed)

      31
    • (A1005.003A) (Fabric Login (FLOGI) from address FC_address failed authorization/authentication)

      32
    • (A1005.003B) (Warning - Debug logging filter level is set)

      32
    • (A1005.003C) (User Port(s) port_numbers, isolated, lost steering path, administering them to state DOWNED.)

      32
    • (A1005.003E) (Warning, port(s) port_numbers configured ONLINE, but remain DOWN after NDCLA.)

      32
    • (A1005.003F) (Badly formatted SML Notification Ack session session_ID string - string)

      32
    • (A1005.0040) (Unsupported SFP within port.)

      32
    • (A1005.0041) (Setting port admin state DOWN due to POST failure)

      32
    • (A1005.0042) (Target device port_address attached to port port_number with IOStreamGuard Enabled)

      32
    • (A1005.0045) (Configured port data conflicting within hardware capabilities)

      33
    • (A1006.0004) (Zoning conflict, device_WWN is in an ACL hard zone, but device_WWN share a soft zone)

      33
    • (A1006.0005) (Zoning enforcement error in Nameserver)

      33
    • (A1006.0006) (Zoning conflict, device_WWN and device_WWN do not share an ACL hard zone, but device_WWN share a soft zone)

      33
    • (A1007.0001) (NS: Unspecified zoning enforcement error)

      33
    • (A1007.0002) (Security: WWN device_WWN not authorized to join))

      33
    • (A1007.0005) (Security: Authentication request was rejected by port.)

      33
    • (A1007.0006) (Security: Could not validate Authentication Response from port_number, payload seems to be incorrect.)

      34
    • (A1007.0007) (Security: Fabric Binding (ESA) not supported on remote switch and Fabric Binding is enabled, failing security checks)

      34
    • (A1007.0008) (Security: ESA Response failure, failing security checks)

      34
    • (A1007.0009) (Security checks EFMD response failure, failing security check.)

      34
    • (A1007.000A) (Security: Dropping lock held by domain domain_id for number seconds)

      34
    • (A1007.000B) (Security: EFMD Rejected, bad revision)

      34
    • (A1007.000C) (Security policy restrict mode, security db differs)

      35
    • (A1007.000D) (Security policy in mode mode, other switch in mode mode, sec db conflict)

      35
    • (A1007.000E) (Security: Auth challenge received from WWN port_WWN, not Authorized to join)

      35
    • (A1007.000F) (Security: Chap session Gen Response indicates error, chap unable to authenticate)

      35
    • (A1007.0010) (Security: Chap session Receive Challenge indicates bad state, chap unable to authenticate)

      35
    • (A1007.0011) (Chap failure, isolating with Invalid Attach)

      35
    • (A1007.0012) (Port with World Wide Name (WWN) port_WWN address FC_address not authorized to login, verify MS security configuration)

      36
    • (A1007.0013) (Response from address FC_address, lacks authentication, discarding)

      36
    • (A1007.0014) (Response from WorldWide Name (WWN) device_WWN address FC_address, failed authentication, discarding)

      36
    • (A1007.001C) (Security: Bad Authentication Flags)

      36
    • (A1007.001D) (Ignoring RADIUS Server Radius_Server, invalid IP address configured)

      36
    • (A1007.001F) (Access reject from RADIUS server IP_address:port for device on this port)

      36
    • (A1007.0020) (MAX Retry count reached on CHAP Authentication Protocol Reset, failing Authentication)

      37
    • (A1007.0021) (No response to RADIUS access request for device on port port)

      37
    • (A1007.0022) (Invalid response authenticator from RADIUS server IP_address:port, check shared secret)

      37
    • (A1007.0023) (Invalid response authenticator from RADIUS server IP_address:port, check shared secret

      37
    • (A1007.0024) (Invalid access accept from RADIUS server IP_address:port, bad or missing Service-Type)

      37
    • (A1007.0025) (Security feature not supported.)

      37
    • (A1007.0026) (Unable to validate Chap Response from device_WWN, possible Chap secret misconfiguration or security breach attempt.)

      37
    • (A1007.0027) (Radius server could not validate authentication response from port_number)

      38
    • (A1007.0028) (Security: 2-Way Authentication, No security entry found for port)

      38
    • (A1007.0029) (Security protocol not using chap, unable to authenticate.)

      38
    • (A1007.002A) (Inconsistent Fabric Binding configuration. Enabled on remote switch(s), disabled on local switch.

      38
    • (A1007.002B) (Security: Chap session Negotiate Authentication failed)

      38
    • (A1007.002C) (Security: Authentication protocol msg (AUTH_DONE) inconsistent with Authentication protocol in progress)

      38
    • (A1007.002D) (Ignoring RADIUS Server RADIUS_server, invalid UDP port configured)

      39
    • (A1007.002E) (Ignoring RADIUS Server RADIUS_server, zero timeout configured)

      39
    • (A1007.002F) (Ignoring RADIUS Server RADIUS_server, no shared secret is configured)

      39
    • (A1007.0030) (Security protocol not using chap, unable to authenticate.)

      39
    • (A1007.0031) (Security protocol not using chap, unable to authenticate.)

      39
    • (A1007.0032) (Fabric conditions or configurations do not currently allow for changing fabric binding.)

      40
    • (A1007.0033) (Device device_WWN failed port binding.)

      40
    • (A1007.0034) (Device device_wwn failed switch binding.)

      40
    • (A1007.0035) (Port taken offline due to switch binding failure following configuration change.)

      40
    • (A1007.0036) (Port taken offline due to port binding failure following configuration change.)

      40
    • (A1007.0037) (Device device_wwn failed port binding)

      40
    • (A1007.0038) (Device device_wwn failed switch binding)

      40
    • (A2000.0001) (Pwr1 removed - ALARM SET)

      41
    • (A2000.0002) (Pwr2 failure - ALARM SET)

      41
    • (A2001.0001) (Pwr2 was installed - ALARM CLEARED)

      41
    • (A2001.0002) (Pwr1 OK - ALARM CLEARED)

      41
    • (A2002.0001) (fan_number was removed)

      41
    • (A2002.0002) (Fan fan_number failure - ALARM SET)

      41
    • (A2002.0003) (Fan flow mismatch - ALARM SET)

      41
    • (A2003.0003) (Fan flow match - ALARM CLEARED)

      41
    • (A3000.0001) (Temp overheat, sensor_name sensor reads value C - ALARM SET)

      41
    • (A3000.0002) (Temp sensor sensor_name on blade slot_number reads value C - ALARM SET)

      42
    • (A3001.0001) (Temp overwarm, sensor_name sensor reads value C - ALARM SET)

      42
    • (A3002.0001) (sensor name sensor has returned to normal range - ALARM CLEARED)

      42
    • (A3002.0002) (Temp sensor sensor_name on blade slot_number reads value C - ALARM CLEARED)

      42
    • (A3003.0001) (Fatal hardware error detected. The switch is not operational. Use 'show post log' for more info)

      42
    • (A3003.0002) (POST detected a fatal error the last time it ran. The switch is not operational. Use 'show post log' for more info)

      42
    • (A3003.0003) (Diagnostics have detected a fatal error on the I/O blade in slot slot_number. The blade is not operational.)

      42
    • (A3004.0001) (Non-fatal hardware error detected. Use 'show post log' for more info)

      43
    • (A3004.0002) (Diagnostics have detected a partial failure on the I/O blade in slot slot_number)

      43
    • (A3008.0000) (The configuration area was damaged or a Remake Filesystem was performed from PROM mode. You must perform a 'config restore' to clear this error.)

      43
    • (A3014.0001) (Blade in slot slot_number set Down due to failure of all AuxPorts)

      43
    • (A3014.0002) (Blade in slot slot_number set Online due to internal failure recovery)

      43
    • (A3014.0003) (Blade blade_ID set Down due to blade type mismatch)

      43
    • (A4000.0001) (threshold of value hit rising trigger trigger_number in value second window on port port_number - ALARM SET

      43
    • (A6000.0002) (Configured port speed for port port_number not compatible with media.)

      44
    • (A6001.0001) (cmon: insufficient memory)

      44
    • (A6001.0002) (cmon: blade failed NDCLA)

      44
    • (A6001.0003) (cmon: switch failed NDCLA)

      44
    • (A6001.0004) (cmon: Blade was removed during NDCLA)

      44
  • 3.2 Critical Events

    45
    • (C) (8100.0001) (LOG_MASK_NAME_SERVER) (Port: port_number) (Protocol violation from address FC_address)

      45
    • (C) (8300.0006) (Zoning) (Dropping lock held by domain domain_ID, Merge requests outstanding)

      45
    • (C) (8300.000A) (Zoning) (Fabric Busy, failing lock request from domain domain_ID)

      45
    • (C) (8300.000B) (Zoning) (Failed to lock fabric, lock already held by switch with domain domain_ID)

      45
    • (C) (8300.000C) (Zoning) (Couldn't acquire lock from domain domain_ID)

      45
    • (C) (8300.000E) (Zoning) (Failing release of fabric lock held by switch with domain= domain_ID)

      45
    • (C) (8300.000F) (Zoning) (Failed to lock fabric, lock already held with lock id lock_id)

      45
    • (C) (8400.0002) (Switch) (The switch is being reset - this may take several seconds)

      45
    • (C) (8400.0003) (Switch) (The switch is being shutdown - this may take several seconds)

      45
    • (C) (8400.0004) (Switch) (The switch is proceeding with a hotreset)

      45
    • (C) (8400.0005) (Switch) (The switch is now performing a hotreset)

      46
    • (C) (8400.0006) (Switch) (Admin mode for user user_name was canceled by user user_name)

      46
    • (C) (8400.0008) (Switch) (The switch will be reset in several seconds

      46
    • (C) (8400.0009) (Switch) (The switch will hardreset in several seconds)

      46
    • (C) (8400.000A) (Switch) (The switch will hotreset in several seconds)

      46
    • (C) (8400.000B) (Switch) (The switch will be shutdown several seconds)

      46
    • (C) (8400.000C) (Switch) (Configuration is being restored - this could take several minutes)

      46
    • (C) (8400.000D) (Switch) (Attempted feature upgrade of features already installed)

      46
    • (C) (8400.000E) (Switch) (Upgrading Licensed Ports to number_of_ports)

      46
    • (C) (8400.000F) (Switch) (Attempted Licensed Port upgrade of ports that are already licensed)

      46
    • (C) (8400.0011) (Switch) (The switch will be reset in several seconds due to a config restore)

      46
    • (C) (8400.0012) (Switch) (I/O blade in slot slot_number has been inserted into chassis)

      46
    • (C) (8400.0014) (Switch) (I/O blade in slot slot_number has been removed from chassis)

      47
    • (C) (8400.0015) (Switch) (The switch will be reset in several seconds)

      47
    • (C) (8400.0016) (Switch) (Group members are being saved - this may take several seconds)

      47
    • (C) (8400.0017) (Switch) (Security edit session has been preempted by a security merge)

      47
    • (C) (8400.001C) (Switch) (The switch is being reset - this may take several seconds)

      47
    • (C) (8400.001D) (Switch) (The switch is being shutdown - this may take several seconds)

      47
    • (C) (8400.0027) (Switch) (Invalid user account_name attempted to log into switch)

      47
    • (C) (8400.0028) (Switch) (Invalid user account_name attempted to log into switch)

      47
    • (C) (8400.0029) (Switch) (User account_name attempted to log into switch with an incorrect password)

      47
    • (C) (8400.002A) (Switch) (User account_name attempted to log into switch with an incorrect password)

      47
    • (C) (8400.002E) (Switch) (number_of_zone_members zone members are being saved - this may take several seconds)

      47
    • (C) (8400.002F) (Switch) (Zoning database of over 3000 zone members may damage some vendors’ switches, if you have other vendor’...

      48
    • (C) (8400.0030) (Switch) (Zoning edit session has been preempted by a zoning merge)

      48
    • (C) (8400.003B) (Switch) (Creating the support file - this will take several seconds)

      48
    • (C) (8400.003C) (Switch) (Network setup is changing - may lose connection - admin being released automatically)

      48
    • (C) (8400.0042) (Switch) (Warning - deleting the active zoneset may cause fabric isolation)

      48
    • (C) (8400.0043) (Switch) (Warning - clearing the active zoneset may cause fabric isolation)

      48
    • (C) (8400.0044) (Switch) (A reset is required since a Power On Self Test (POST) has never run on these ports)

      48
    • (C) (8400.0045) (Switch) (Upgrading License for 4G capability)

      48
    • (C) (8400.0046) (Switch) (Upgrading License for multiple ISL capability)

      48
    • (C) (8400.0047) (Switch) (New licenses are being installed

      48
    • (C) (8400.0049) (Switch) (The Configuration Wizard from ip_address is exiting - switch configuration may have changed)

      49
    • (C) (8400.004B) (Switch) (Attempted to license modes on an unsupport switch type)

      49
    • (C) (8400.004C) (Switch) (Services setup is changing - may lose connection - admin being released automatically)

      49
    • (C) (8400.004D) (Switch) (ntpdate: no server suitable for synchronization found)

      49
    • (C) (8400.004E) (Switch) (ntpdate: : synchronization lost)

      49
    • (C) (8400.004F) (Switch) (Upgrading License for Interop_2 mode capability

      49
    • (C) (8400.0050) (Switch) (Upgrading License allowing manufacturing setup mode capability)

      49
    • (C) (8400.0052) (Switch) (Upgrading License for EFCM capability)

      49
    • (C) (8400.0053) (Switch) (The switch WWN is being upgraded)

      49
    • (C) (8400.0054) (Switch) (radius: All RADIUS servers failed to respond)

      49
    • (C) (8400.0057) (Switch) (User login (user_name) is being closed - Telnet connections have been disabled

      49
    • (C) (8400.0058) (Switch) (User (user_name) is using their initial/default password)

      50
    • (C) (8400.005D) (Switch) (Upgrading License for SANdoctor)

      50
    • (C) (8400.0062) (Switch) (New firmware has been installed.)

      50
    • (C) (8400.0065) (Switch) (Warning-When leaving the Diagnostics AdminState of the switch an automatic reset of the switch will occur. The switch will come back up in the configured AdminState.)

      50
    • (C) (8400.0066) (Switch) (Warning-When leaving the Diagnostics AdminState of a blade, an automatic reset of the blade will occur. The blade will come back up in the configured AdminState.)

      50
    • (C) (8400.0067) (Switch) (Warning-When leaving the Diagnostics AdminState of the switch an automatic reset of the switch will occur. The switch will come back up in the configured AdminState.)

      50
    • (C) (8400.0068) (Switch) (Warning-When leaving the Diagnostics AdminState of a blade, an automatic reset of the blade will occur. The blade will come back up in the configured AdminState.)

      50
    • (C) (8400.0069) (Switch) (Warning-When leaving the Diagnostics AdminState of the primary CPU blade, an automatic reset of the blade will occur. The blade and the switch will come back up in the configured AdminState.)

      51
    • (C) (8400.006A) (Switch) (Upgrading License for Fabric Security)

      51
    • (C) (8400.006B) (Switch) (Upgrading License for CLI Extended Credits capability)

      51
    • (C) (8600.0009) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port port_number.)

      51
    • (C) (8600.000A) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port port_number.)

      51
    • (C) (8600.000B) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port port_number.)

      51
    • (C) (8600.0013) (PortApp) (Invalid vendor data from media device for port port_number)

      51
    • (C) (8600.0014) (PortApp) (Invalid vendor data from media device for port port_number)

      51
    • (C) (8600.0015) (PortApp) (Unresponsive device alpa on port port_number removed from the fabric.)

      51
    • (C) (8600.0016) (PortApp) (Online port(s) port_numbers were reset due to disruption during hot reset.)

      52
    • (C) (8600.0017) (PortApp) (External port license count exceeded, downing external port port_number)

      52
    • (C) (8600.0018) (PortApp) (External port license became available, re-starting downed external ports)

      52
    • (C) (8600.0019) (PortApp) (Internal port license count exceeded, downing internal port port_number)

      52
    • (C) (8600.001A) (PortApp) (Internal port license became available, re-starting downed internal ports)

      52
    • (C) (8700.0007) (EPort) (Port: port_number) (Received frame from address not in Access Control List (ACL) hard zone (src address = FC_address, dest address = FC_address))

      52
    • (C) (8700.000D) (EPort) (Port: port_number) (Resetting Inter-Switch Link (ISL), a time out value has been reconfigured.)

      52
    • (C) (8700.000E) (EPort) (Port: port_number) (InteropCredit value was reconfigured, resetting port.)

      52
    • (C) (8700.000F) (EPort) (Port: port_number) (Broadcast frame received & broadcast disabled, discarding broadcast frames.)

      53
    • (C) (8700.0010) (EPort) (Port: port_number) (Inter-Switch Link (ISL) unstable. ISL init will be held back until ISL up time is 5 seconds)

      53
    • (C) (8700.0011) (Eport) (Port: port_number) (Connection failure, remote switch not compatible)

      53
    • (C) (8700.0012) (Eport) (Port: port_number) (Connection failure, fabric limited to two switches)

      53
    • (C) (8700.0013) (Connection failure, fabric limited to two switches)

      53
    • (C) (8F00.000C) Fabric Status status

      53
    • (C) (8F00.000D) Switch Status status

      53
    • (C) (8F00:000E) Link Status status

      53
  • 3.3 Warning Events

    54
    • (W) (8400.0007) (Switch) (Attempted unauthenticated login username account_name)

      54
    • (W) (8400.0018) (Switch) (User (user_name>) login rejected - maximum logins already in use)

      54
    • (W) (8300.0011) (User) Releasing Lock held too long by domain_ID.

      54
    • (W) (8300.0012) (User) SFC received with unknown operation operation_code.

      54
    • (W) (8300.0013) (User) Unlock failed, resource unavailable, will retry.

      54
    • (W) (8300.0014) (User) Bad release change authorization response received from switch with domain ID domain_ID

      54
    • (W) (8300.0015) (User) No RCA response received from domain_ID, proceeding with unlock

      54
    • (W) (8300.0016) (User) Zoning activation failed, resource limitation

      54
    • (W) (8400.0018) (Switch) (User account_name login rejected - maximum logins already in use)

      55
    • (W) (8400.001F) (Switch) (User account_name login rejected - maximum logins already in use)

      55
    • (W) (8400.0020) (Switch) (User account_name login rejected - maximum logins already in use)

      55
    • (W) (8400.0021) (Switch) (User account_name login rejected - maximum logins already in use)

      55
    • (W) (8400.0034) (Switch) (Port port_number was Downed before hotreset due to excessive errors - still DOWNED)

      55
    • (W) (8400.0035) (Switch) (Retrying port port_number that was Downed due to excessive errors)

      55
    • (W) (8400.003D) (Switch) (Invalid user (user_name) attempted to log into switch)

      55
    • (W) (8700.0009) (EPort) (Port: port_number) (Inter-Switch Link (ISL) communication error)

      55
    • (W) (8700.000A) (EPort) (Port: port_number) (No response from remote switch, resetting Inter-Switch Link (ISL))

      56
    • (W) (8F00.000C) (Fabric Status status)

      56
    • (W) (8F00.000D) (Switch Status status)

      56
    • (W) (8F00:000E) (Link Status status)

      56
  • 3.4 Informative Events

    56
    • (I) (8200.0001) (mserver) (Hotreset is not permitted at this time, try again later)

      56
    • (I) (8200.0002) (mserver) (Port: port_number) (Rejecting request from address FC_address, inband management is disabled on port port_number)

      56
    • (I) (8200.0100) (mserver) (Cannot map number_of_characters characters to Switch Symbolic Name (max number_of_characters))

      56
    • (I) (8200.0101) (mserver) (Cannot map non-printable characters to Switch Symbolic Name)

      56
    • (I) (8200.0200) (mserver) (Rejecting request (GZM) for zone zone_name containing unsupported alias member(s)

      57
    • (I) (8200.0201) (mserver) (Rejecting request command:command)

      57
    • (I) (8200.0202) (mserver) (Rejecting request (GZS) for zone set zone_set_name containing unsupported alias member(s))

      57
    • (I) (8200.0300) (mserver) (Cannot register HBA World Wide Name (WWN) device_WWN, FDMI database has reached its configured limit.)

      57
    • (I) (8200.0301) (mserver) (Port: port_number) (Rejecting FDMI request from address FC_address on port port_number; FDMI is configured as disabled.)

      57
    • (I) (8300.0004) (zoning) (New Active ZoneSet zone_set_name)

      57
    • (I) (8300.0007) (zoning) (Fabric lock held by domain domain_ID, hotreset not permitted)

      57
    • (I) (8300.0008) (zoning) (Processing zoning requests, Checkpoint not permitted)

      57
    • (I) (8300.0009) (Zoning) (Reading zoning database, Checkpoint not permitted)

      58
    • (I) (8300.0010) (Zoning) (Removing all inactive zoning objects)

      58
    • (I) (8400.0001) (Switch) (Modifying configured DomainID domain_ID to negotiated value domain_ID)

      58
    • (I) (8400.0006) (Switch) (Admin mode for user account_name was canceled by user account_name)

      58
    • (I) (8400.001A) (Switch) (Admin access has timed out for user account_name)

      58
    • (I) (8400.0022) (Switch) (Successful login user account_name with admin privilege)

      58
    • (I) (8400.0023) (Switch) (Successful login user account_name with admin privilege)

      58
    • (I) (8400.0024) (Switch) (Successful login user account_name without admin privilege)

      58
    • (I) (8400.0025) (Switch) (Successful login user account_name without admin privilege)

      58
    • (I) (8400.0026) (Switch) (A zoning configuration edit session has been canceled)

      58
    • (I) (8400.002B) (Switch) (User login account_name is being closed - In-Band connections have been disabled)

      59
    • (I) (8400.002C) (Switch) (User login session session_ID user account_name has timed out)

      59
    • (I) (8400.0036) (Switch) (Hotreset not permitted at this time, try again later)

      59
    • (I) (8400.0037) (Switch) (VIEnable automatically set to False since MFSEnable has been set to True)

      59
    • (I) (8400.0038) (Switch) (LCFEnable automatically set to False since MFSEnable has been set to True)

      59
    • (I) (8400.0039) (Switch) (MFSEnable automatically set to False since VIEnable has been set to True)

      59
    • (I) (8400.003A) (Switch) (MFSEnable automatically set to False since LCFEnable has been set to True)

      59
    • (I) (8400.003E) (Switch) (Readjusting TempMonitoringWarning from value C to value C)

      59
    • (I) (8400.0040) (Switch) (Readjusting TempMonitoringFailure from value C to value C)

      59
    • (I) (8400.0048) (Switch) (A CIM edit session has been canceled)

      60
    • (I) (8600.0007) (PortApp) (Port: port_number) (Cancelling Online Test)

      60
    • (I) (8700.0002) (EPort) (In Fabric Reconfiguration)

      60
    • (I) (8700.0003) (EPort) (Topology change, switch with domain ID domain_ID joined the fabric)

      60
    • (I) (8700.0004) (EPort) (Port: port_number) (Remote Switch World Wide Name (WWN) is switch_WWN)

      60
    • (I) (8700.0005) (EPort) (Port: port_number) (Inter-Switch Link (ISL) Offline)

      60
    • (I) (8700.0006) (EPort) (Port: port_number) (Reinitializing port previously isolated for reason reason)

      60
    • (I) (8700.0008) (EPort) (Link State Record (LSR) aged out for domain ID =domain_ID)

      60
    • (I) (8700.000B) (EPort) (Hotreset prohibited, fabric is busy.)

      60
    • (I) (8700.000C) (EPort) (Hotreset prohibited, fabric is busy.)

      60
    • (I) (8F00.0006) Fabric Removed

      60
    • (I) (8F00.0007) Switch Added

      61
    • (I) (8F00.0008) Switch Removed

      61
    • (I) (8F00.0009) Link Added

      61
    • (I) (8F00.000A) Link Removed

      61
    • (I) (8F00.000B) Login Changed

      61
    • (I) (8F00.000C) Fabric Status status

      61
    • (I) (8F00.000D) Switch Status status

      61
    • (I) (8F00:000E) Link Status status

      61