Справочник Пользователя для Q-Logic 59060-02 B

3 – Event Messages

Critical Events

3-34

59060-02 B

(C) (8400.0005) (Switch) (The switch is now performing a hotreset)

Meaning:

Hot reset is in progress.

(C) (8400.0006) (Switch) (Admin mode for user user_name was canceled by user

user_name)
Meaning:

Admin authority mode was canceled by another user interface
session that had the authority to do so.

(C) (8400.0008) (Switch) (The switch will be reset in several seconds

Meaning:

The switch is being reset as a result of a command from a user
interface.

(C) (8400.0009) (Switch) (The switch will hardreset in several seconds)

Meaning:

A hard reset of the switch is pending.

(C) (8400.000A) (Switch) (The switch will hotreset in several seconds)

Meaning:

A hot reset is pending.

(C) (8400.000B) (Switch) (The switch will be shutdown several seconds)

Meaning:

The switch will be shutdown several seconds.

(C) (8400.000C) (Switch) (Configuration is being restored - this could take several minutes)

Meaning:

When a complete configuration restore is done on a switch, a
switch reset follows immediately to place the new configuration in
effect.

(C) (8400.000D) (Switch) (Attempted feature upgrade of features already installed)

Meaning:

The feature is already installed.

(C) (8400.000E) (Switch) (Upgrading Licensed Ports to number_of_ports)

Meaning:

The number of licensed ports on the switch has been upgraded.

(C) (8400.000F) (Switch) (Attempted Licensed Port upgrade of ports that are already

licensed)
Meaning:

The switch has already been upgraded to the number of licensed
ports.

(C) (8400.0011) (Switch) (The switch will be reset in several seconds due to a config

restore)
Meaning:

Switch management is processing a config restore command.

(C) (8400.0012) (Switch) (I/O blade in slot slot_number has been inserted into chassis)

Meaning:

An I/O blade has been inserted into the chassis.