Справочник Пользователя для RuggedCom RS900
RS900 Family Installation Guide
2.2.4 Dielectric Strength Testing
Units which are to have dielectric strength testing (HIPOT testing) done in the field must have the
braided ground cable disconnected during the test. This is required in order to prevent the surge
suppression circuitry, which is connected to surge ground, from being activated.
suppression circuitry, which is connected to surge ground, from being activated.
Figure 7 - Dielectric Strength Testing
Page 19 of 42
© 2008 RuggedCom Inc. All rights reserved.
Rev100