Справочник Пользователя для Emerson UPS Systems
Installation Drawings
12
Figure 8
Liebert NXL Maintenance Bypass Cabinet—400kVA outline drawing
See Note 10
See Note 11
CG
CG
Knock-out for control
wiring O 1.0" (25.4mm)
3 Places
wiring O 1.0" (25.4mm)
3 Places
Conduit
Landing
Area
Landing
Area
Conduit
Landing
Area
Landing
Area
24.2
(615)
39.4
(1000)
76.8
(1950)
38.5
(979)
12.2
(309)
28.2
( 716)
38.5
( 979)
62.8
(1595)
37.3
(947)
30.8
(782)
24.0
( 610)
4.9
(124)
TYP
3.9
( 100)
TYP
21.9
(556)
16.1
(410)
21.1
(535)
Knock-out for control
wiring O 1.0" (25.4mm)
2 Places
wiring O 1.0" (25.4mm)
2 Places
NOTES:
1. All dimensions are in inches (mm).
2. 24" minimum clearance above unit required for air exhaust.
3. Keep cabinet within 15 degrees of vertical while handling.
4. Top and bottom cable entry available through removable
access plates. Remove, punch to suit conduit size and replace.
5. Unit bottom is structurally adequate for forklift handling.
6. Includes side panel. Side panels are removed between
adjacent units which are bolted togethe r.
7. Control wiring and power wiring must be run in separate conduits.
8. Aluminum and copper-clad aluminum cables are not recommended.
9. All wiring is to be in accordance with national and local electrical codes.
10. Widths are without side panels. The width is 25.6" (650mm) with side panels.
11. The depth dimension includes the front door and rear panel.
1. All dimensions are in inches (mm).
2. 24" minimum clearance above unit required for air exhaust.
3. Keep cabinet within 15 degrees of vertical while handling.
4. Top and bottom cable entry available through removable
access plates. Remove, punch to suit conduit size and replace.
5. Unit bottom is structurally adequate for forklift handling.
6. Includes side panel. Side panels are removed between
adjacent units which are bolted togethe r.
7. Control wiring and power wiring must be run in separate conduits.
8. Aluminum and copper-clad aluminum cables are not recommended.
9. All wiring is to be in accordance with national and local electrical codes.
10. Widths are without side panels. The width is 25.6" (650mm) with side panels.
11. The depth dimension includes the front door and rear panel.
TOP VIEW (DOOR OPEN)
FRONT
SIDE VIEW
BOTTOM VIEW (FOOTPRINT)
BOTTOM CONDUIT PLATES