Справочник Пользователя для Canon SX7 MARKII

PROJ

ECTIN

AN IMAGE

FROM TH

E COMPUT

Press the [OK] button.

z The result of keystone adjustment is memorized. If you place the projector at the same posi-

tion, the keystone adjustment is not necessary.

z When the Keystone adjustment is selected, signals are processed digitally. The image may

look different from the original one.

z The aspect ratio of the image may change after the keystone adjustment.
z Keystone can be adjusted vertically and horizontally within the range of +/-20 degrees. The

amount of adjustment may be less than +/-20 degrees depending on the combination of the
amount of optical zooming, input signal type, and adjustment direction (vertical or horizon-
tal).

z If the keystone distortion is too large to adjust, move the projector installation position (P32).
z To reset the keystone adjustment to 0, press the [KEYSTONE] button again to display the

[Keystone reset] window. On the window, select [OK] with the [<] button, and then press the
[OK] button.

z If you select [16:9 D. image shift] for [Screen aspect], the keystone adjustment will be dis-

abled. Project the image at right angle to the screen.