Справочник Пользователя для Canon SX7 MARKII
54
PROJ
ECTIN
G
AN IMAGE
FROM TH
E COMPUT
ER
Setting Up the Computer Screen Automatically (AUTO PC)
This projector automatically makes optimum settings for the total number of dots and track-
ing depending on a signal type (SXGA+, XGA, etc.).
The auto PC adjustment function does not need to be performed if the projector is project-
ing an image properly with [Auto Setup].
You can use this function if the input signal is [ANALOG PC-1] or [ANALOG PC-2].
ing depending on a signal type (SXGA+, XGA, etc.).
The auto PC adjustment function does not need to be performed if the projector is project-
ing an image properly with [Auto Setup].
You can use this function if the input signal is [ANALOG PC-1] or [ANALOG PC-2].
1
Press the [AUTO PC] button.
The auto PC adjustment function is activated and the projected image is optimized.
z For some computers, the auto PC adjustment function does not optimize the projected
image. If such is the case, you need to make settings (input signal select, total dots, track-
ing, horizontal/vertical positions, horizontal/vertical pixels, etc.) for the input signal (P91, 93-
95).
ing, horizontal/vertical positions, horizontal/vertical pixels, etc.) for the input signal (P91, 93-
95).
z The previous signal type ([ANALOG PC-1] or [ANALOG PC-2]) is recorded. If you connect
the projector to the same computer, you can project the image with the same settings as
before simply by selecting the input signal.
before simply by selecting the input signal.