Справочник Пользователя для Netopia R2020

The Default Answer Profile screen appears.

If Must Match a Defined Profile is set to Yes, then the NAT attributes of the Connection Profile take 
precedence. If you toggle Must Match a Defined Profile to No, IP-related menu options become visible.

■

Select IP Parameters and press Return. The IP Parameters (Default Answer Profile) screen appears.

You can then bind NAT Map Lists and NAT Ser ver Lists in the same fashion as described in the section 

                             Default Answer Profile

         Must Match a Defined Profile:      No

         IP Enabled:                        Yes
         IP Parameters...

         IPX Enabled:                       No

         Data Compression...                Standard LZS
         Max. Receive Packet Size:          1500

         Idle Timeout:                      300

Return/Enter accepts * Tab toggles * ESC cancels.
Configure values which may be used when receiving a call in this screen.

                   IP Parameters (Default Answer Profile)

         Filter Set (Firewall)...
         Remove Filter Set

         Address Translation Enabled:       Yes
         Interface IP Address:              0.0.0.0

         NAT Map List...
         NAT Server List...

         Receive RIP:                       Both
         Transmit RIP:                      Off

Return/Enter to select a Firewall Filter Set for incoming calls.
Configure IP values to use when no matching Profile can be found.