Справочник Пользователя для Netopia R2020

7.

Select Default Gateway Address, and enter the network address of the IPX network to which all packets of 
unknown destination address should be routed.

Note: The Default Gateway Address is usually set up to match the IPX Address in your network Connection 
Profile. 

8.

To configure filters and filter sets, select Filters and Filter Sets and go to the IPX filters and filter sets 
screens. For information on how to configure IPX filters and filter sets, see 

9.

Select IPX Wan Pool Base Address and enter the first IPX network address to be allocated to requesting 
IPX WAN clients. The base address you enter must not conflict with other IPX networks assigned to your IPX 
internet.

The answer profile can be configured to accept calls from remote IPX networks. To configure the answer profile 
to accept calls from remote IPX networks, from the WAN Configuration menu go to the Default Answer Profile 
screen.

Note: The Default Answer Profile screen varies according to configuration.

To enable IPX routing in the answer profile, select IPX Enabled and toggle it to Yes. When IPX Enabled is set to 
Yes, the item IPX Parameters appears below it.

Main

Menu

WAN

Default Answer

Configuration

Profile

                             Default Answer Profile

         Calling Number Authentication...             Ignored

         Must Match a Defined Profile:                Yes

         PPP Authentication...                        PAP

Configure values which may be used when receiving a call in this screen.