Справочник Пользователя для Netopia R2020
WAN and System Configuration 7-9
To help you determine whether you need to use the System Configuration options, review the following
requirements. If you have one or more of these needs, use the System Configuration options described in the
later chapters.
requirements. If you have one or more of these needs, use the System Configuration options described in the
later chapters.
■
Two or more outgoing connection profiles to connect to more than one remote location (for example, to
connect to the Internet and to a network at another office).
connect to the Internet and to a network at another office).
■
System Configuration of dynamic IP address distribution through DHCP, MacIP, or BootP.
■
Customized incoming call profile to control received calls.
■
Scheduled connections.
■
Greater network security through the use of filters, CallerID, callback, and SecurID.
■
System Configuration of AppleTalk LAN settings.
■
System Configuration of connections to AppleTalk networks through the Internet or any IP network, using
AURP (AppleTalk “tunneling”).
AURP (AppleTalk “tunneling”).
■
System Configuration of connection profiles. See the table below for a par tial list of the options available
through System Configuration.
through System Configuration.
Layer Category
Parameter Type
Options
Default settings
Protocol Layer
IP Parameters
Filter Sets:
Basic Firewall
NetBIOS Filter
NetBIOS Filter
Receive RIP:
Both
Transmit RIP:
Off
IPX Parameters
Path Delay:
1 second
NetBios Packet For warding:
No
Incoming/outgoing Packet &
SAP filter:
SAP filter:
On
Periodic RIP/SAP timers:
60 seconds
Datalink Layer
PPP/MP Parameters
Data Compression:
Standard LZS
Send Authentication:
PAP
Channel Usage:
Dynamic
Bandwidth Allocation:
BAP
Maximum Packet Size:
1500