Справочник Пользователя для Netopia CLI 874

show version [ cli ] [ firmware ] [ hardware ] [ mib ] [ wan 1 ] [ wan 2 ]

This command allows you to display some or all of the router's version strings. If you don't specify anything 
after the keyword version, the router displays a list of all of the version strings; other wise it displays the 
specified version string.

The R-Series WAN inter face module firmware version is displayed for the specified WAN module, wan 1 or wan 
2. wan1 is an acceptable substitute for wan 1; wan2 is an acceptable substitute for wan 2.

The CLI, hardware, and product-specific SNMP MIB version strings consist of a major version, minor version, 
release stage, and revision, displayed in the (decimal) form “MM.mmsrr”, where: 

‘MM’ is the major version, 

‘mm’ is the minor version, 

‘s’ is the release stage -– e (experimental), d (development), a (alpha), b (beta), or f (final),

‘rr’ is the revision.

The firmware version string consists of a major version, minor version, point release version, release stage, and 
revision, displayed in the (decimal) form “MM.mm.ppsrr”, where: 

‘MM’ is the major version, 

‘mm’ is the minor version, 

‘pp’ is the point release version, 

‘s’ is the release stage – d (development), a (alpha), b (beta), fc (final candidate), or f (final),

‘rr’ is the revision.

#show version

   cli      version:  01.00d00

   firmware version:  04.10.00

   hardware version:  01.00f00

   mib      version:  01.00f00

   wan1     version:  fw v1.0.6

   wan1     version:  V2.210-N-V90_2M_DLS

   #

system restart-delay [ time (minutes) | no ]
show system restart-delay

Note:

These commands are suppor ted beginning with firmware version 8.5.

The system restart-delay command schedules a system reset for a specified number of minutes from now. The 
show command displays how many minutes are left before a reset will take place. The no modifier, or setting 
the time to zero, cancels the scheduled reset.