Справочник Пользователя для Netopia CLI 874
Motorola Netopia® Router CLI Commands 2-109
traceroute [ hostname | ip-address ]
Note:
This command is suppor ted beginning with firmware version 8.5.
This command allows you to display the path to a destination by showing the number of hops and the router
addresses of these hops for each router encountered between the Motorola Netopia
addresses of these hops for each router encountered between the Motorola Netopia
®
Router and a destination
hostname or IP address. Firewalls or other security measures that block PING traffic also block traceroutes.
upgrade key-value
If the upgrade operation is successful the router will reboot. Other wise, an error will be returned. The key-value
argument is the upgrade key that was received when the upgrade was purchased.
argument is the upgrade key that was received when the upgrade was purchased.
upnp enable [ {yes | no} ]
no upnp enable
show upnp enable
no upnp enable
show upnp enable
Note:
These commands are suppor ted beginning with Firmware Version 8.3.3.
These commands allow you to enable, disable, or show the status of Universal Plug and Play. UPnP™ is a set of
protocols that allows a PC to automatically discover other UPnP devices (anything from an internet gateway
device to a light switch), retrieve an XML description of the device and its ser vices, control the device, and
subscribe to real-time event notification.
protocols that allows a PC to automatically discover other UPnP devices (anything from an internet gateway
device to a light switch), retrieve an XML description of the device and its ser vices, control the device, and
subscribe to real-time event notification.
By default, upnp is enabled on the Motorola Netopia
®
Gateway.
For Windows XP users, the automatic discover y feature places an icon representing the Motorola Netopia
®
Gateway automatically in the “My Network Places” folder.
PCs using UPnP can retrieve the Gateway’s WAN IP address, and automatically create NAT por t maps. This
means that applications that suppor t UPnP, and are used with a UPnP-enabled Motorola Netopia
means that applications that suppor t UPnP, and are used with a UPnP-enabled Motorola Netopia
®
Gateway, will
not need application layer gateway suppor t on the Motorola Netopia
®
Gateway to work through NAT.
You must reboot the Motorola Netopia
®
device for this setting to take effect.