Справочник Пользователя для Netopia CLI 874

Xauth configuration commands

Note:

The commands in this section are suppor ted beginning with Firmware Version 8.4.2.

ike phase1 { name | index } xauth mode { disabled | client | concentrator }
show ike phase1 { name | index } xauth mode

These commands allow you to enable, disable, or show the status of the Xauth extensions to IPsec, as client or 
concentrator when ike phase1 mode is set to aggressive. Default is disabled.

ike phase1 { name | index } xauth database { local | radius }
show ike phase1 { name | index } xauth database

These commands allow you to specify the authentication database type to be used for Xauth user 
authentication when xauth mode is set to concentrator. If you specify radius, the Router will use the glo-
bally-configured RADIUS ser ver database. (IF xauth mode is set to client, it can only send the locally-configured 
username/password.) See 

.

ike phase1 { name | index } xauth username name
show ike phase1 { name | index } xauth username

These commands allow you to set or show the the Xauth username specified by name.

ike phase1 { name | index } xauth password password
show ike phase1 { name | index } xauth password

These commands allow you to set or show the the Xauth password specified by password.

Xauth Configuration Commands

ike phase1 { name | index } xauth mode { disabled | client | concentrator }
show ike phase1 { name | index } xauth mode

ike phase1 { name | index } xauth database { local | radius }
show ike phase1 { name | index } xauth database

ike phase1 { name | index } xauth username name
show ike phase1 { name | index } xauth username

ike phase1 { name | index } xauth password password
show ike phase1 { name | index } xauth password