Справочник Пользователя для Netopia CLI 874
3-24 Command Line Interface Commands Reference
cp { name | index } gre checksum [ yes | no ]
show cp { name | index } gre checksum [ yes | no ]
show cp { name | index } gre checksum [ yes | no ]
These commands allow you to enable, disable, or show whether a GRE tunnel will transmit a checksum field on
outgoing GRE packets, when enabled. The Router will implicitly check incoming GRE packets with a checksum
value.
outgoing GRE packets, when enabled. The Router will implicitly check incoming GRE packets with a checksum
value.
cp { name | index } gre sequence-datagrams [ yes | no ]
show cp { name | index } gre sequence-datagrams [ yes | no ]
show cp { name | index } gre sequence-datagrams [ yes | no ]
These commands allow you to enable, disable, or show whether a GRE tunnel will transmit sequence numbers
on outgoing GRE packets, when enabled. Also specifies that the GRE tunnel will check an incoming GRE
packet’s sequence number field for out-of-sequence ordering and buffering. When disabled, the CPE will not
send sequence numbers; and it will consider all inbound packets to be in-sequence (i.e. not check the “S” bit
flag, if set).
on outgoing GRE packets, when enabled. Also specifies that the GRE tunnel will check an incoming GRE
packet’s sequence number field for out-of-sequence ordering and buffering. When disabled, the CPE will not
send sequence numbers; and it will consider all inbound packets to be in-sequence (i.e. not check the “S” bit
flag, if set).
cp { name | index } gre key [ 0..232-1 ]
show cp { name | index } gre key [ 0..232-1 ]
show cp { name | index } gre key [ 0..232-1 ]
These commands allow you to specify or show a 32-bit integer key value assigned to the GRE tunnel; if zero,
the tunnel is considered not to have a key identifier. It will not set the “K” bit in the GRE header, and ignore any
key value received from the peer. If non-zero, the received key field value (if present in the GRE header) will be
checked against the local tunnel value, and discarded if the comparison fails. If non-zero, all outbound GRE
headers will include this value in the Key Field.
the tunnel is considered not to have a key identifier. It will not set the “K” bit in the GRE header, and ignore any
key value received from the peer. If non-zero, the received key field value (if present in the GRE header) will be
checked against the local tunnel value, and discarded if the comparison fails. If non-zero, all outbound GRE
headers will include this value in the Key Field.
CompuServe Login
CompuServe Login Connection Profile Commands
cp { name | index } telco compuserve login { yes | no }
show cp { name | index } telco compuserve login
no cp { name | index } telco compuserve login
show cp { name | index } telco compuserve login
no cp { name | index } telco compuserve login
cp { name | index } telco compuserve hostname string
show cp { name | index } telco compuserve hostname
no cp { name | index } telco compuserve hostname
show cp { name | index } telco compuserve hostname
no cp { name | index } telco compuserve hostname
cp { name | index } telco compuserve username string
show cp { name | index } telco compuserve username
no cp { name | index } telco compuserve username
show cp { name | index } telco compuserve username
no cp { name | index } telco compuserve username
cp { name | index } telco compuserve password string
no cp { name | index } telco compuserve password
no cp { name | index } telco compuserve password