Справочник Пользователя для IBM 4986B LanProbe
Download New Firmware
Downloading Firmware using a Networked PC and a Terminal
Downloading Firmware using a Networked PC and a Terminal
86
Figure 6-21: LanProbe Main Menu (Networked PC)
NOTE
Item 5 in Figure 6-21 is not displayed if the Allow TFTP firmware downloads
menu item is not enabled. Refer to “Modify/View Security Values” on page 22 for
more information on enabling this menu item.
menu item is not enabled. Refer to “Modify/View Security Values” on page 22 for
more information on enabling this menu item.
If item 5 (TFTP Download new firmware) is not displayed, the number used to
access items 6, 7, and 8 will be different.
access items 6, 7, and 8 will be different.
2. Press
5
to display the Download menu as shown in Figure 6-22 on page 86.
Figure 6-22: LanProbe TFTP Download Menu (Networked PC)
Main Menu - Revision
1. Modify/View configuration values ->
2. Modify/View security values ->
3. Modify/View interface values ->
4. Display interface summary
5. TFTP Download new firmware ->
6. XMODEM Download new firmware ->
7. Warm start and Exit
8. Cold start and Exit
TFTP Download Menu -- Firmware Rev.
1. Filename to download
ethsnmp.lp
2. tftp server IP address
X.X.X.X
3. Download firmware
0. Return to previous menu
LanProbe IP address:
0.0.0.0
Subnet mask:
0.0.0.0
Default gateway IP address:
0.0.0.0