Справочник Пользователя для IBM 4986B LanProbe
Installation
Installing the Probe
Installing the Probe
34
3. Place LanProbe in the left support shelf slot while aligning the two empty
screw holes (from Step 2 on page 33) with the two screw holes in the
support shelf. The correct alignment has the front of LanProbe facing out the
front of the support shelf, refer to Figure 3-11 on page 35.
support shelf. The correct alignment has the front of LanProbe facing out the
front of the support shelf, refer to Figure 3-11 on page 35.
4. Attach LanProbe to the support shelf with two 0.75” #M4 self-tapping
POZIDRIV
screws. Refer to Figure 3-11 on page 35 for the correct
alignment.
5. Attach one Dual Lock Reclosable Fasteners‚ strip to the top of LanProbe,
being careful to place it in a location that will both allow for the alignment
of the power module to be inside the support shelf and to not block the
LanProbe vent holes, refer to Figure 3-11 on page 35.
of the power module to be inside the support shelf and to not block the
LanProbe vent holes, refer to Figure 3-11 on page 35.