Справочник Пользователя для IBM ECS-320A
S
ERIAL
I
NTERFACE
D
EVELOPERS
G
UIDE
6.3.3 nvmData.ActMode
Type: UWord16
Size: 1 Word
Description: See
X
Appendix E
X
for specifics on this value.
6.3.4 nvmData.AutoNucData
Type: NVM_AUTO_NUC_MODE
/* Auto NUC Switch Parameters */
struct _NVM_AUTO_NUC_MODE
{
struct _NVM_AUTO_NUC_MODE
{
unsigned
LowSatInt:14;
/* Auto NUC switch low saturation intensity */
unsigned
ReservedA:2; /*
Reserved
*/
unsigned
LowSatCount:16;
/* Auto NUC switch low saturation count */
unsigned
HighSatInt:14;
/* Auto NUC switch high saturation intensity */
unsigned
ReservedB:2; /*
Reserved
*/
unsigned
HighSatCount:16; /* Auto NUC switch high saturation count */
};
typedef struct _NVM_AUTO_NUC_MODE
NVM_AUTO_NUC_MODE, *PTR_NVM_AUTO_NUC_MODE;
Size: 4 Words
Description: See
X
Appendix E
X
for specifics on this value.
6.3.5 nvmData.AutoRfshTime
Type: UWord16
Size: 1 Word
Description: If the auto refresh time flag is enabled; then this value determines the time interval
between automatic 1-point NUC refresh calibrations. Counter is reset upon any 1-point NUC refresh
calibrations.
between automatic 1-point NUC refresh calibrations. Counter is reset upon any 1-point NUC refresh
calibrations.
6.3.6 nvmData.AutoRfshTemp
Type: UWord16
Size: 1 Word
Description: If the auto refresh on temperature flag is enabled; then this value determines the
temperature delta required to perform an automatic 1-point NUC refresh calibrations. This value is
stored as an ADC count value. ADC count is saved upon any 1-point NUC refresh calibrations.
temperature delta required to perform an automatic 1-point NUC refresh calibrations. This value is
stored as an ADC count value. ADC count is saved upon any 1-point NUC refresh calibrations.
6.3.7 nvmData.ActPal
Type: UWord16
Size: 1 Word
Description: See
X
Appendix E
X
for specifics on this value.
6.3.8 nvmData.OvlMode
Type: UWord16
Size: 1 Word
Description: See
X
Appendix E
X
for specifics on this value.
27