Справочник Пользователя для National Instruments NI PXI-7811R

Complete the following steps to install the NI-RIO device drivers that are 
included with the PXI-7811R device. If you are using LabVIEW, complete 
the installation instructions in the 

before installing the NI-RIO device drivers.

1.

Run 

setup.exe

 from the NI-RIO CD and follow the setup 

instructions.

2.

Follow the onscreen instructions until the Feature Tree window 
appears. 

3.

In the Feature Tree window, select the components to install. You must 
install NI-VISA, NI-RIO, and NI Measurement & Automation 
Explorer (MAX).

4.

Follow the onscreen instructions to complete the driver installation.

5.

Reboot your computer.

This section describes how to unpack and install the PXI-7811R device.
You can install the PXI-7811R in any available peripheral slot in the PXI 
or CompactPCI chassis.

You must install the NI-RIO device drivers before installing the PXI-7811R device.

The PXI-7811R device ships in an antistatic package to prevent 
electrostatic discharge from damaging device components. To prevent such 
damage when handling the device, take the following precautions:

•

Ground yourself using a grounding strap or by holding a grounded 
object, such as your computer chassis.

•

Touch the antistatic package to a metal part of the computer chassis 
before removing the devices from the package.

Never touch the exposed pins of connectors.

Remove the devices from the package and inspect the devices for loose 
components or any other sign of damage. Notify NI if the devices appear 
damaged in any way. Do not install damaged devices into the computer.

Store the PXI-7811R in the antistatic envelope when not in use.