Справочник Пользователя для Motorola XPR 7550

^ 

or 

v

 to Edit Priority and press 

c

 to select.

^ 

or 

v

 to the required priority level and press 

c

 to select.

The display shows positive mini notice before returning to 
the previous screen.

The priority icon appears left of the member’s name.

When you start a scan, your radio cycles through the 
programmed scan list for the current channel looking for voice 
activity.

The LED blinks yellow and the scan icon appears on the status 
bar.

During a dual mode scan, if you are on a digital channel, and 
your radio locks onto an analog channel, it automatically 
switches from digital mode to analog mode for the duration of 
the call. This is also true for the reverse.

There are two ways of initiating scan: 

Main Channel Scan (Manual): Your radio scans all the 
channels/groups in your scan list. On entering scan, your 

radio may – depending on the settings – automatically start 

on the last scanned “active” channel/group or on the channel 

where scan was initiated.

Auto Scan (Automatic): Your radio automatically starts 
scanning when you select a channel/group that has Auto 

Scan enabled.

NOTE: This feature is not applicable in Capacity Plus and 

Linked Capacity Plus.