Справочник Пользователя для Motorola XPR 7550

Procedure: 
Press the programmed Scan button to start or stop Scan. 
OR 
Follow the procedure below.

Use the Channel Selector Knob to select a channel 
programmed with a scan list.

c

 to access the menu.

^ 

or 

v

 to Scan and press 

c

 to select.

^ 

or 

v

 to Scan State and press 

c

 to select.

^ 

or 

v

 to required scan state and press 

c

 to select.

The display shows Scan On when scan is enabled. The LED 
blinks yellow and the scan icon appears. 
OR
The display shows Scan Off if scan is disabled. The LED 
turns off and the scan icon disappears. 

During scanning, your radio stops on a channel/group where 
activity is detected. The radio stays on that channel for a 
programmed time period known as “hang time”. 

Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from 
your mouth.

 If the Channel Free Indication feature is enabled, you 

hear a short alert tone the moment the transmitting radio 
releases the PTT button, indicating the channel is free for 
you to respond.

Press the PTT button during hang time. The LED lights up 
solid green.

Wait for the Talk Permit Tone to finish (if enabled) and speak 
clearly into the microphone.
OR

 Wait for the PTT Sidetone to finish (if enabled) and 

speak clearly into the microphone.

Release the PTT button to listen.

If you do not respond within the hang time, the radio returns 
to scanning other channels/groups.