Справочник Пользователя для Mitsubishi Electronics QnUCPU
1
2
3
APPEN-
DIX
6
7
8
Appendix
3 Me
thod of
Replacing B
a
sic M
odel Q
C
PU
or High P
or High P
e
rf
or
mance
Model Q
C
P
U
wit
h U
n
h U
n
iv
ersal
Model Q
C
PU
Appendix
3.
3
In
3
In
struc
tions
tions
APPENDICES
App
-
25
Appendix 3.3.2 Replacing programs using multiple CPU transmission
dedicated instructions
(1) Replacing the module with the QnUD(H)CPU or Built-in Ethernet port QCPU
TableApp.26 shows instructions need to be replaced and corresponding alternative instructions. For
the specifications of each instruction, refer to the manuals for the Motion CPU.
the specifications of each instruction, refer to the manuals for the Motion CPU.
(2) Replacing the module with the Q00UCPU, Q01UCPU, or Q02UCPU
The Q00UCPU, Q01UCPU, and Q02UCPU support the same multiple CPU transmission dedicated instructions
used in the Basic model QCPU.
The alternative instructions in TableApp.27 are not available for these CPU modules.
used in the Basic model QCPU.
The alternative instructions in TableApp.27 are not available for these CPU modules.
TableApp.27 SFC instructions not supported in the QnUD(H)CPU and Built-in Ethernet port QCPU and thier alternatives
Symbol
Instruction description
Symbol of alternative
instruction
S(P).DDWR
Write other CPU device data into host CPU
D(P).DDWR
S(P).DDRD
Read other CPU device data into host CPU
D(P).DDRD
S(P).SFCS
Request of motion SFC program startup
D(P).SFCS
S(P).SVST
Request of servo program startup
D(P).SVST
S(P).CHGA
Current value change of halted axis/synchronized encoder/cam axis
D(P).CHGA
S(P).CHGV
Axis speed change during positioning and JOG operation
D(P).CHGV
S(P).CHGT
Torque control value change during operation and suspension in real mode
D(P).CHGT
S(P).GINT
Request of other CPU interrupt program startup
D(P).GINT