Справочник Пользователя для Mitsubishi Electronics LT-2240

Separate UHF and VHF Antennas

(Figure 1)

1. Connect the UHF and VHF antenna leads to the

UHF/VHF combiner.

2. Push the combiner onto ANT on the TV side

panel.

UHF/VHF combiners are not provided with

the TV. They are available at most electronic stores.

Note: This TV will only be able to provide an analog

signal through ANT on the TV side panel.

Figure 1. Connecting separate UHF and VHF

antennas.

Note: See page 5 for Outdoor Antenna Grounding

Figure 2. Connecting twin lead antenna, coaxial lead

antenna, or wall outlet cable.

Note: See page 5 for Outdoor Antenna Grounding

Twin Lead Antenna, Coaxial Lead

Antenna, or Wall Outlet Cable

(Figure 2)

For antenna with twin flat leads:

1. Connect the 300Ohm twin leads to the

transformer.

2. Push the 75Ohm side of the transformer onto

ANT on the TV side panel.

300Ohm to 75Ohm matching transformers are not provided

with the TV. They are available at most electronic stores.

For cable or antenna with coaxial lead:

3. Connect the incoming cable to ANT on the TV

side panel.

Note: This TV will only be able to provide an analog

signal through ANT on the TV side panel.

Connecting an Antenna or Wall Outlet Cable

Additional connection cables are not provided

with the TV. They should be available at

most electronic stores.

Note: The TV side panel and connections shown here are for reference only and may vary by model.

��
��
��

��

�

��

�

��

LT2240_LT3040_OG_v6.ind

04.1.21, 4:02 PM