Справочник Пользователя для Mitsubishi Electronics LT-2240

Connecting an Antenna to a Cable Box and VCR,

Connecting Audio/Video to the Cable Box or VCR

Figure 6. Connecting the VCR Audio/Video.

Note: The TV side panel and connections shown here are for reference only and may vary by model.

You may connect to the S-VIDEO or VIDEO
terminal but not to both.

Cable Box

(Figure 5)

1. Connect the incoming cable to ANT on the TV

side panel.

NOTE: For best performance, please see Composite

Video with Audio or S-Video with Audio,
below.

Figure 5. Connecting the VCR with cable box.

Composite Video with Audio or S-

Video with Audio (Recommended)

(Figure 6)

1. Connect a video or a S-Video cable from VIDEO

OUT on the VCR back panel to VIDEO or
S-VIDEO, INPUT-1 or INPUT-2 on the TV side
panel.

2. Connect a set of audio cables from AUDIO OUT

on the VCR back panel to AUDIO INPUT-1 or
INPUT-2 on the TV side panel.

• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel

If your VCR is mono (non-stereo), connect only the
white (left) cable.

��

�

��

��
��
��

��

�

��

�

��

�

��

�

��

�

��

�

LT2240_LT3040_OG_v6.ind

04.1.21, 4:02 PM