Справочник Пользователя для Radio Shack 43-3101
3
Using the Doorbell
Your visitor presses
BELL
on the doorbell to
sound the doorbell.
Hold down
TALK
TO
DOOR
on the indoor
intercom to reply to the caller. The TALK TO
DOOR indicator lights. When you release
DOOR indicator lights. When you release
TALK
TO
DOOR
, the caller can reply by
pressing
PRESS
TO
TALK
on the doorbell
intercom.
Notes:
• If there is no voice communication
between the doorbell and the indoor
intercom within about 10 seconds, the
doorbell intercom may be disabled and
should be initialized by pressing
intercom within about 10 seconds, the
doorbell intercom may be disabled and
should be initialized by pressing
BELL
again.
• You can also use other intercoms to reply
to the doorbell as long as they are set on
the same frequency.
the same frequency.
• If the channel is occupied by other
intercom users, the door chime cannot be
sent to the intercoms in use. The
conversation between intercoms will not
be sent to the doorbell.
sent to the intercoms in use. The
conversation between intercoms will not
be sent to the doorbell.
USING MULTIPLE
INTERCOMS
INTERCOMS
You can set up several indoor intercoms for
station-to-station communication. Simply set
station-to-station communication. Simply set
CHANNEL
A
/
B
/
C
on the back of each intercom
to the same frequency as other stations with
which you want to communicate.
which you want to communicate.
For example, you could set a station installed
in the kitchen to channel
in the kitchen to channel
A
, a station installed
in the family room to channel
B
, and a station
installed in a bedroom to channel
C
. Using the
station installed in the kitchen, you can
communicate with the station in the family
room by setting the channel selector to
communicate with the station in the family
room by setting the channel selector to
B
, or
with the station in the bedroom by setting the
channel selector to
channel selector to
C
. If you set all stations to
channel
A
, you can communicate with the
other two stations from any station.
Calling Another Intercom Station
Be sure the intercom stations you plan to use
are turned on and adjusted to the desired
volume. Press
are turned on and adjusted to the desired
volume. Press
CALL
to sound a tone alerting
the person at the other station that you are
about to speak. The CALL indicator lights.
about to speak. The CALL indicator lights.
Hold down
TALK
and speak in a normal voice.
The TALK indicator lights. When you finish
speaking, release
speaking, release
TALK
and listen for a
response.
Notes:
• Only one party can talk at a time. Wait
until the other party finishes before
answering.
answering.
• If your voice sounds distorted, you might
be speaking too loudly or too close to the
station’s microphone.
station’s microphone.
WARNING:
To reduce the risk of fire or shock
hazard, do not expose this product to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
This symbol is intended to alert you to
the presence of uninsulated danger-
ous voltage within the product’s enclo-
sure that might be of sufficient
magnitude to constitute a risk of elec-
tric shock. Do not open the product’s
case.
the presence of uninsulated danger-
ous voltage within the product’s enclo-
sure that might be of sufficient
magnitude to constitute a risk of elec-
tric shock. Do not open the product’s
case.
This symbol is intended to inform you
that important operating and mainte-
nance instructions are included in the
literature accompanying this product.
that important operating and mainte-
nance instructions are included in the
literature accompanying this product.
!
!