Справочник Пользователя для Mitsubishi Electronics LT-4260

Connecting a VCR directly to LCD Side Panel

Figure 1. Connecting the VCR Audio/Video.

NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to
the LCD Display.

You may connect to the S-VIDEO or VIDEO

terminal but not to both.

Composite Video with Audio or S-

Video with Audio (Recommended)

(Figure 1)

1. Connect a video or a S-Video cable from VIDEO

OUT on the VCR back panel to VIDEO INPUT
on the LCD Display side panel.

2. Connect a set of audio cables from AUDIO OUT

on the VCR back panel to VIDEO INPUT/
AUDIO RIGHT & LEFT on the LCD Display
side panel.

• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel

��

�

��

��
��
��

��

�

��

�

The Display Side Panel is shut-off

when the HD-6000 is connected to the

LCD Display using a HDMI™ cable.

Refer to Chapter 2 in the HD-6000

Owner’s Guide on how to connect A/V

equipment to the HD-6000. The HD-

6000 does not shutoff the PC INPUT.