Справочник Пользователя для Mitsubishi Electronics LT-4260

Connecting an Audio Receiver Directly to LCD Side Panel

Stereo Audio System

(recommended for shelf units or A/V receivers without

digital audio inputs)

(Figure 2)

1. Connect the audio cables from AUDIO

OUT on the LCD Display side panel to TV IN or

AUX IN terminals on the back of the audio system.

• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel

2. Turn off the LCD Display speakers through the

AUDIO/VIDEO SETTINGS Menu, page 52.

3. Set the audio system’s input to the TV or AUX

position to hear the LCD Displays audio through a

stereo system.

A/V Receiver

(Figure 3)

1. Connect either a video cable or a S-Video cable

(but not both) from VIDEO MONITOR OUT

on the back of the A/V receiver to VIDEO INPUT
on the LCD Display side panel.

2. Connect a set of audio cables from AUDIO OUT

on the LCD Display side panel to AUDIO TV IN
on the back of the A/V receiver.

• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel

NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to
the LCD Display.

Additional connection cables are not provided

with the TV. They should be available at most

electronic stores.

Figure 2. Connecting the Stereo Audio System.

Figure 3. Connecting the A/V Receiver.

Note:

Please see your A/V receiver Owner’s Guide for more

detailed connections.

These types of audio connection do NOT support
multi-channel digital audio. Please refer

to your

other devices Owner’s Guide to verify.

��

�

��

�

��

�

��

�