Справочник Пользователя для Mitsubishi Electronics LT-4260

Connecting a Satellite Receiver/Cable Box Directly to

LCD Side Panel

Satellite Receiver/Cable Box with

Component Video Connections

(Recommended)

(Figure 6)

1. Connect RCA-type cables from the Satellite

receiver/Cable Box outputs to the LCD Display

side panel. Component VIDEO INPUT may be

used for 480i, 480p, 720p or 1080i components.

2. Connect the L (left) and R (right) audio

cables from the Satellite/Cable Box receiver to

COMPONENT VIDEO INPUT/AUDIO
RIGHT & AUDIO LEFT on the LCD Display

side panel.

3. To utilize the benefits of a digital A/V receiver,

connect your Satellite/Cable Box receiver’s digital
audio out to a digital input on your digital A/V

receiver.

See your Satellite/Cable Box receiver and A/V

receiver Owner's Guides for instructions.

See Appendix A, page 61 for component video

signal compatibility information.

For digital audio connections, see your DTV

receiver and A/V receiver Owner’s Guides.

Figure 6. Connecting a Satellite receiver with
component Video Connections.

NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to the
LCD Display.

��

�

��

�

��

��
��

��

�

��

�

��

�

��

�