Справочник Пользователя для Honeywell HRDPX
![Honeywell](https://files.manualsbrain.com/attachments/04072ac208afe0f60402a9212acd23d57421a7fb/common/fit/150/50/3e168605118cbbd2e280a10aaeca155d86bc5b4c616b0334def9ca6d226c/brand_logo.png)
Setup
______________________________________________________________________________________________
50
50
Client Configuration
Configure general remote access.
REMOTE PORT – Use this port number when configuring remote access
software. The default port is 4000 but can be changed.
software. The default port is 4000 but can be changed.
WEB PORT – Used for remote connections using a web browser. This port
should be open on the router. Default web port is 80.
should be open on the router. Default web port is 80.
REMOTE CONFIG – Enable to allow an administrator to change configurations
using remote access software.
using remote access software.
TCP MTU – Set network bandwidth. If the network is low speed, set this value
as the network (aka. Bandwidth Throttling).
as the network (aka. Bandwidth Throttling).