Справочник Пользователя для Panasonic WJ-HD500A

32

The mirroring function uses an auxiliary array of inexpen-
sive disks to record the same data on two disks at the same
time.
If an error or malfunction occurs on one of the hard disks,
the other disk still records the data normally. This ensures
reliability of the system, since the data will always be avail-
able on one of the disks.

To use this function, the Disk Recorder must be equipped
with an optional internal hard disk. Refer to the installation
for details of installing the disk.

It is recommended to set up this function when

the Disk Recorder is operated for the first time.
Otherwise the previously recorded data will be
erased by activating this function.

The mirroring function can only be set during the power up
procedure, as shown below.

1. Turn on the Disk recorder by pressing the 

switch located on the rear of the Disk Recorder. Make
sure that the OPERATE indicator on the front panel is
illuminated.

2. After you completed the start, the Disk Recorder will run

through a series of instructions for the system on the
Multiscreen Monitor.

Camera Images

Recording

Auxiliary
Recording

Manual Recorder

Group 1

Timer
Recorder

Group 2

Group 3

Group 4

Emergency Recorder

Manual Recorder

Group 1

Timer
Recorder

Group 2

Group 3

Group 4

Emergency Recorder

WJ-HD500 Disk 1 (Master)

WJ-HD500 Disk 2 (Slave)

3. If the Disk Recorder is powered up successfully, the

displays as shown below will appear.
Press the 

button within five seconds, and

the DISK MENU shown below will appear on the moni-
tor.

4. Move the cursor to “FORMAT” on the table by pressing

the  A,  B,  D or  C button, then press the 

button.

The FORMAT MENU will appear on the monitor.

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

B

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢