Справочник Пользователя для Panasonic WJ-HD500A

33

• Select “MIRROR RELEASE” in the menu by pressing

the  A,  B,  D or  C button, then press the 

button

during the step 7 procedure.
When the mirror function is activated, the “MIRROR
RELEASE” is displayed in the menu as shown below.

• All procedures are similar to setting the mirror function.

5. Select the ALL password (5-digit) by pressing the

Numeric buttons (

).

Refer to the password setup in the SYSTEM SETUP
menu for further details.
The factory default setting is 12345.

• To select "0" for numeric input, press the numeric 10

button.

• Entering an input will automatically check the pass-

word.
If the password is not correct, "PASSWORD
ERROR!" is displayed on the monitor screen and
the display returns to step 3.
To enter the password again, repeat procedures 4
and 5.

• To quit entering the password, press the 

button.

6. If the password is correct, the instructions shown below

appear in the lower-left corner of the menu.

7. Move the cursor to “ALL MIRROR” on the table by

pressing the A, B, D or C button, then press the 

button. The ALL MIRROR FORMAT menu will appear on
the monitor.

8. Select “YES” in the menu by pressing the A or B but-

ton, then press the 

button to start formatting.

9. When the formatting is completed, "FORMAT DONE!"

appears in the lower-center of the menu.
Normal camera images will appear on the monitor after
five seconds.

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢