Справочник Пользователя для Mitel 5320e

5320e IP Phone – User Guide 

Direct Paging - Handsfree Answerback Enabled 

When you receive a Direct Page, Handsfree Answerback automatically establishes a 
Handsfree call on your phone after a single burst of tone. 

Your administrator enables or disables Handsfree Answerback on your phone. After your 
administrator enables Handsfree Answerback, you can choose to turn it on or off directly from 
your phone. 

  When your phone is idle, press   (

MUTE) once. The MUTE key light flashes to indicate 

that Handsfree Answerback is ON. 

  When a Direct Page arrives, the MUTE key light turns OFF and a Handsfree call is 

automatically established. 

  Press the flashing   (

MUTE) key once. The MUTE key light turns OFF. 

  To respond to a Direct Page when Handsfree Answerback is OFF, see "Direct Page - 

Handsfree Answerback Disabled" elsewhere in this guide. 

 

 

Note: By default, Handsfree Answerback is turned OFF at your phone. If the   (MUTE) key is 
OFF when your set is idle, Handsfree Answerback is OFF. 

 

Phone is idle and MUTE  
is flashing 

1.  Check that MUTE is OFF. 

2.  Listen for the paging party. 

3. Begin 

speaking. 

4.  Lift the handset if you wish to switch from a Handsfree call to 

a handset call.  

You are on a handset or headset call, 
and MUTE is OFF 

1.  Check that MUTE is flashing. 

2.  Press MUTE. The light turns ON solid, and you are now 

speaking to the paging party and have muted your 
handset/headset call. 

3.  Speak to the paging party. Press MUTE to alternate 

between handset/headset and handsfree calls.  

You are on a MUTED 
handset/headset call, OR, you are on 
a Handsfree call 

The party paging you receives a busy tone. Handsfree 
Answerback does not interrupt your call.