Справочник Пользователя для Toshiba DK40I

6.

LED buttons 01~20

LED buttons 01~20 activate features for each station port or port 
range. Make the following selections by turning the appropriate button 
LED On or Off for each item (01~20) for each port, as marked on the 
system record sheet:

LED 01: Speakerphone Enabled

LED 02: Microphone Key Lock Enabled

LED 03: Microphone On at Start of Call

LED 04: Not Used

LED 05: Speed Dial Allowed

LED 06: Automatic Busy Redial Access Enabled

LED 07: Automatic Off-hook Call Announce

LED 08: Forced Account Code Enabled

LED 09: Toll Restriction Override Code Revision Authority

LED 10: DISA Security Code Change Allowed

LED 11: Dial Pulse (DTMF Off) for Standard Telephone

LED 14: Account Codes Verified 

LED 15: Verified Account Code Revision Authority

LED 16: Traveling Class of Service Code Revision Authority 

LED 17: Do Not Disturb Override Allowed

LED 18: Executive Override Allowed

LED 19: Privacy Override Allowed

LED 20: Not Used

If programming a port range, the LED indications are as follows:

♦

LED-On, all ports in range are enabled for that item.

♦

LED-Off, all ports in range are disabled for that item.

♦

LED-FLASHING, some ports in range are enabled and some 
ports are disabled.

7.

+ROG

Secure data in system programming.

8.

6SNU6SHDNHU

Prepare system for another selection (go back to Step 5), or exit 
Program 30 (continue with Step 9).

9.

+ROG

Secure Program 30 data in system memory.

10.

6SNU6SHDNHU

Exit Program 30. Enter another program number or exit programming 
mode (go to Step 11). Speaker beeps to indicate it is exiting Program 
33.

11.

+ROG

Exit programming mode. 

1. N-N = Programming telephone [PDN]