Справочник Пользователя для Nortel Networks Modular ICS 4.0

Скачать
Страница из 242
120 / Customizing your telephone
Modular ICS 4.0 System Coordinator Guide
P0881591 Issue 01
3. Cover the Norstar Receiver Card underneath the receiver 
of each telephone with the plastic lens.
Norstar default button assignments
During Startup, the Norstar installer chooses one of the 
available templates. Default features are assigned 
automatically to the programmable buttons on Norstar 
telephones, and vary with the template and the telephone. The 
default features are listed in the following tables in this 
chapter.
Rules of default button assignment
Line and Intercom buttons are assigned by default templates 
and can be changed in programming. Handsfree/Mute and 
answer buttons are not assigned by default. If these features 
are defined, however, they are automatically assigned to 
specific buttons, as described on this and the following page. 
None of these buttons can be assigned to M7100 telephones.
The Handsfree/Mute feature appears on the bottom right-hand 
button (the bottom button on the M7208 telephone), moving 
the Intercom button(s) up one position.
Each telephone can have up to eight Intercom buttons. They 
appear above the Handsfree/Mute button at the bottom right-
hand position on your telephone (the bottom button on the 
M7208 telephone).
Tips - 
Norstar telephones are shipped from the factory 
with the button caps in place for the Square template.
Please consult your customer service representative to 
determine the type of template programmed into your 
system before applying button assignments.
p0881591.book  Page 120  Wednesday, August 19, 1998  6:43 PM