Справочник Пользователя для Nortel Networks Modular ICS 4.0

Using System features / 183

P0881591 Issue 01

Modular ICS 4.0 System Coordinator Guide

ƒ•°·

The Programmed Release feature performs same function as 
® in a programmed dialing sequence. When the system 
encounters Programmed Release in a dialing sequence, it stops 
dialing and hangs up the call. 

The Programmed Release symbol (fi) takes up two of the 24 
spaces in a programmed dialing sequence.

The system ignores any digits or commands that follow a 
Programmed Release in a programmed dialing sequence.

ƒ•·

Run/Stop inserts a break point into a sequence of dialed 
numbers or characters used for automatic dialing. This may be 
necessary when you are connecting to a PBX or similar host 
system.

For example, you can call a company with an automated 
attendant that instructs you to dial the internal number you 
need. You can program the company number, a Run/Stop, 
then the internal number on one external autodial button. Press 
the autodial button once to dial the company number. When 
you hear the automated attendant, press the autodial button 
again to dial the internal number.

The Run/Stop symbol (fl) uses one of the 24 spaces in an 
autodial or speed dial sequence.

You can include up to three Run/Stop commands in a dialing 
string. The system ignores a fourth Run/Stop, and any digits or 
commands that follow it in a programmed dialing sequence.

p0881591.book  Page 183  Wednesday, August 19, 1998  6:43 PM