Справочник Пользователя для Nortel Networks Modular ICS 4.0

Using System features / 189

P0881591 Issue 01

Modular ICS 4.0 System Coordinator Guide

You can program your Norstar system with the Automatic Time 
and Date feature to automatically update the time and date. 
Whenever the clock is out of sync by more than two minutes, as 
a result of a power failure or a loss of power, the first incoming 
call updates the clock automatically after two rings.

Note:  CLASS Trunks are required for this feature to work. 

Consult your customer service representative to 
determine if you have CLASS Trunks.

This feature also allows the automatic changing between North 
American daylight savings and standard time. Your system uses 
the time and date information from the first incoming call after 
two rings to update to daylight savings or standard time.

The Automatic Time and Date feature automatically overrides 
any manually programmed changes to the time and date in your 
system.

Note:  The year is not included with the time and date 

information and must be programmed manually if the 
current year differs from the network time.

1. Place the programming overlay on any M7310 or M7324 

telephone.

2. Press 

ƒ••¤flfl‹›› (CONFIG). 

The display shows Password:.

(Blank display) Enter your password. It is not 
shown on the display.

You have entered a password that is not 
programmed into your system.

Invalid Password

p0881591.book  Page 189  Wednesday, August 19, 1998  6:43 PM