Справочник Пользователя для Nortel Networks Modular ICS 4.0
30 / Answering calls
Modular ICS 4.0 System Coordinator Guide
P0881591 Issue 01
Line buttons
One line button for each line is assigned to your telephone.
Press the line button to select the line you want to answer or
use to make a call. Having several line buttons gives you
immediate access to more than one line.
Press the line button to select the line you want to answer or
use to make a call. Having several line buttons gives you
immediate access to more than one line.
The M7100 telephone has two intercom paths which are used
instead of line buttons to answer and make calls. Each M7100
can be assigned two lines. You can press
instead of line buttons to answer and make calls. Each M7100
can be assigned two lines. You can press
˙ to switch
between two calls, one active and one on hold.
What line indicators mean
Rings you may hear
º
Flashing on and off for
equal lengths of time
equal lengths of time
There is an incoming call on the line.
º
Flashing on and off more
quickly
quickly
You have placed a call on hold.
º
Flashing on for longer
than off
than off
Someone else has put a call on hold
on that line.
on that line.
º
On, not flashing
You are connected to the call on that
line or the line is in use elsewhere.
line or the line is in use elsewhere.
Off
The line is free.
A double beep every ten
seconds
seconds
A call has been camped to your telephone.
A long single ring
There is an external call on the line for you.
A shorter double ring
There is an internal call on the line for you or
a call is being transferred to you.
a call is being transferred to you.
A brief single ring
A call is being redirected on one of your
redirected lines. You cannot answer this call.
redirected lines. You cannot answer this call.
Three beeps descending
in tone
in tone
You are receiving a priority call.
p0881591.book Page 30 Wednesday, August 19, 1998 6:43 PM