Справочник Пользователя для Nortel Networks Modular ICS 4.0
P0881591 Issue 01
Modular ICS 4.0 System Coordinator Guide
Time savers for making calls
Storing a number on a memory button for Autodial
You can program memory buttons for one-touch dialing of
internal or external telephone numbers.
internal or external telephone numbers.
Buttons used for lines, answer or Handsfree/Mute cannot be
used as autodial buttons.
used as autodial buttons.
If the power to your Norstar system is off for more than three
days, autodial numbers (as well as some other system
programming) may be lost from the memory.
days, autodial numbers (as well as some other system
programming) may be lost from the memory.
Adding an autodial button
ƒ•⁄ or ƒ•¤
1. Press
ƒ•⁄ to program an external number or
ƒ•¤ for an internal number.
2. Choose a button and then enter the number as if you were
dialing it.
When programming Autodial you can use:
•
Last Number Redial
•
Saved Number Redial
•
destination codes (choose
∆ as the line)
•
host system signalling
Choosing a line for Autodial
To include a line selection for an external number, press the
line or intercom button before you enter the number. To select
a line pool, press a programmed line pool button, or press
∆ and enter a line pool access code.
line or intercom button before you enter the number. To select
a line pool, press a programmed line pool button, or press
∆ and enter a line pool access code.
p0881591.book Page 63 Wednesday, August 19, 1998 6:43 PM