Инструкции Пользователя для Mitsubishi Electronics WD-62725

54

55

NetCommand

®

 Controlled Recordings

Record To Setup

Your TV is able to start and stop recordings 

automatically and send the signals from one external 
playback device to another external recording device.  
It is also able to convert digital channels and IEEE 

1394 device signals to analog signals that can be 

recorded on NetCommand compatible analog VHS 
and S-VHS VCRs.  

You cannot record from an analog channel or device 

or a VHS or S-VHS VCR to a digital recording device 
such as a DVCR or A/V Disc.  Also, if you select an 
analog channel, you will not be able to record to a 
digital device.

You can schedule the recording to take place at a 

later time and program the recording duration for a 
minimum of 30 minutes and a maximum of 6 hours (in 
30 minute increments).  The default is 1 hour.

When a digital recording is being made, the TV will 
direct the signals to the recording device using the 
IEEE 1394 cable. When an analog recording is being 

made, the TV will direct signals to the recording using 
the monitor audio/video outputs.

During the recording, the TV can be powered Off.  If 
the TV is powered On, it must be tuned to the source 
that is being recorded.

Recording Now

Can be used when viewing Antenna 1 or 2, an IEEE 

1394 device, or a non-recording traditional device. 

To initiate recording now:

1.  Press REC (record) on the TV remote.

2. Press DEVICE on the remote control to move to the 

Source Device section. 

3. Press ADJUST   or   to select the source device 

you will record from.

4.  Press ENTER to confirm selection and return to the 

“Record to” section.    

5. In the “Record to” section, review the destination 

device (VCR) and duration.  Change if necessary.

6. Press REC a second time to initiate recording.

Time-Delayed Recording

To initiate a time-delayed recording:

1.  Press REC (record) on the TV remote.

2. Press DEVICE on the remote control to move to the 

Source Device section. 

3. Press ADJUST  ,  ,   or   to select the source 

device you will record from.

4.  Press ENTER to confirm your Record from 

selection and move to the Record to section.

5. Press ADJUST   or   to select the Record to 

device, duration time, start time (press ENTER 
after selecting hour, minutes and AM or PM to set 
the time) and day.  For devices that can select 
channels, select the channel.

6. Select Add and press ENTER to add the recording 

to the record list.  If your selection is successful, a 
confirmation message will be displayed.  If you pick 
overlapping times, day(s), or destination devices, 
you will see a message stating there is a conflict.

7.  To exit, press HOME on the TV remote after all 

recordings have been added.