Инструкции Пользователя для Mitsubishi Electronics WD-62725

56

57

NetCommand

®

 Controlled Peer-to-Peer Connections

What is a Peer-to-Peer Connection?

A peer-to-peer connection allows the IEEE 1394 devices 

in your TV network to talk to each other without the 
further need of TV intervention once the peer-to-peer 
connection is established.
For example, the TV can setup a connection for an 

A/V Disc or DVCR that sends a recorded program to 

an IEEE 1394 monitor in another room.  NetCommand 
will establish the connection between the two devices.  
Once the connection has been established, the TV 
can be turned off or used to watch another device.  
Recording from digital channels to a DVCR is also a 
peer-to-peer connection.  In this case, the TV is one of 
the devices in the peer-to peer connection.

Analog or traditional (non-digital) devices can not be 

used for peer-to-peer connections.

Setting up a Peer-to-Peer Connection

A peer-to-peer connection is a current connection and 

cannot be setup as a delayed connection.

To establish a peer-to-peer connection:

1. Press CONNECT on the TV remote.

2.  Press DEVICE on the remote control to move to the 

Source Device section.

3. Press ADJUST    or   to select the source device 

you will record from.

4. Press ENTER  to confirm selection and return to the 

“Record to” section.    

5. In the “Record to” section, review the destination 

device (example: DVCR) and duration.  Change if 

necessary.

6.  Press CONNECT a second time to initiate 

recording.

Canceling a Current Peer-to-Peer 
Connection

When a peer-to-peer connection has been established, 
you can cancel the connection by highlighting 
the source device in the Device Selection menu.  
Confirm that the on-screen icon for the peer-to-peer 
connection is in the Connection Section next to the 

TV icon, then press  CANCEL.  The peer-to-peer 

connection will end and the destination icon will be 

removed.  If there is more than one peer-to-peer 

connection for the same device, all of the connections 
will all be canceled.

NOTE:  Multiple peer-to-peer connections can 
occur simultaneously, sometimes with the same 
source device.  Also, please note that peer-to-
peer connections are NOT listed on the Record 
List  screen.